4CR 80 - centrifugal electric Pump multigirante three-phase
Flow rate up to 80 l/min (4.8 m3/h). Head up to 50 m. Motor 0.55 Kw (0.75 HP).
It is recommended for pumping clean water without abrasive particles and liquids chemically non aggressive to the materials making up the pump.
For reliability and ease-of-use are widely used in the domestic sector and civil society, in particular for the distribution of water coupled to small and medium-sized reservoirs, surge tanks, for decanting and for irrigation of orchards and gardens.
The installation is to be carried out indoors or otherwise protected from the weather.
- Motor connection
- THREE-PHASE
- Motor power (HP)
- 0.75
- Absorption at 230V (A)
- 3.4
- Absorption at 400V (A)
- 2.0
- Suction mouth
- 1 "
- Delivery port
- 1 "
- Body Pump
- AISI 304 stainless steel
- Impeller
- Noryl
- Number of impellers
- 4
- Motor shaft
- Stainless steel EN 10088-3 1.4104
- Check valve
- no
- Degree of protection
- IP 44
- Flow rate min. (l./min.)
- 5
- Max flow (l./min.)
- 80
- Min head (m.)
- 10
- Max head (m.)
- 52
- Employments
- water supply, pressurization systems, irrigation
- Liquid temperature max. (° C)
- 40
- Height (cm)
- 18.2
- Width (cm)
- 18.2
- Depth (cm)
- 38.6
- Weight kg)
- 7.7
- Guarantee
- Two years
|
|
|
|
|
Bearings
Pump side motor bearing | 6203 ZZ |
Opposite side motor bearing | 6203 ZZ |
Shaft seal
Type of seal | Single Mechanical Seal |
Pump side model | AR-13 |
LP diameter | 13 |
Fixed ring LP | Ceramic |
Rotating ring LP | Graphite |
LP elastomer | NBR |
Materials
1.0 - Pump Body | EN 1.4301 stainless steel (AISI 304) |
2.1 - Seal holder cover | EN 1.4301 stainless steel (AISI 304) |
3.0 - Impeller | EN 1.4301 stainless steel (AISI 304) |
4.0 - Pump shaft | EN 1.4057 stainless steel (AISI 431) |
5.1 - Diffuser | Reinforced technopolymer |
5.2 - Shim Ring | POM acetal resin |
6.0 - Motor holder | Aluminum EN-AB 46100 |
6.1 - Engine cover | Aluminum EN-AB 46100 |
7.0 - Lantern | Aluminum EN-AB 46100 |
Compare with Similar Products
4CR 80 - centrifugal electric Pump multigirante three-phaseThis product Flow rate up to 80 l/min (4.8 m3/h). Head up to 50 m. Motor 0.55 Kw (0.75 HP). | 3CR 80 - centrifugal electric Pump multigirante three-phaseFlow rate up to 80 l/min (4.8 m3/h). Head up to 38 m. Motor 0.45 Kw (0.60 HP). | 5CR 80 - centrifugal electric Pump multigirante three-phaseFlow rate up to 80 l/min (4.8 m3/h). Head up to 66 m. Motor 0.75 Kw (1 HP). | 3CR 100 - centrifugal electric Pump multigirante three-phaseFlow rate up to 120 l/min (7.2 m3/h). Head up to 37 m. Motor 0.55 Kw (0.75 HP). | |
---|---|---|---|---|
Motor connection | Motor connection THREE-PHASE | Motor connection THREE-PHASE | Motor connection THREE-PHASE | Motor connection THREE-PHASE |
Motor power (HP) | Motor power (HP) 0.75 | Motor power (HP) 0.60 | Motor power (HP) 1 | Motor power (HP) 0.75 |
Absorption at 230V (A) | Absorption at 230V (A) 3.4 | Absorption at 230V (A) 2.5 | Absorption at 230V (A) 4.3 | Absorption at 230V (A) 3.4 |
Absorption at 400V (A) | Absorption at 400V (A) 2.0 | Absorption at 400V (A) 1.5 | Absorption at 400V (A) 2.5 | Absorption at 400V (A) 2.0 |
Suction mouth | Suction mouth 1 " | Suction mouth 1 " | Suction mouth 1 " | Suction mouth 1 " |
Delivery port | Delivery port 1 " | Delivery port 1 " | Delivery port 1 " | Delivery port 1 " |
Body Pump | Body Pump AISI 304 stainless steel | Body Pump AISI 304 stainless steel | Body Pump AISI 304 stainless steel | Body Pump AISI 304 stainless steel |
Impeller | Impeller Noryl | Impeller Noryl | Impeller Noryl | Impeller Noryl |
Number of impellers | Number of impellers 4 | Number of impellers 3 | Number of impellers 5 | Number of impellers 3 |
Motor shaft | Motor shaft Stainless steel EN 10088-3 1.4104 | Motor shaft Stainless steel EN 10088-3 1.4104 | Motor shaft Stainless steel EN 10088-3 1.4104 | Motor shaft Stainless steel EN 10088-3 1.4104 |
Check valve | Check valve no | Check valve no | Check valve no | Check valve no |
Degree of protection | Degree of protection IP 44 | Degree of protection IP 44 | Degree of protection IP 44 | Degree of protection IP 44 |
Flow rate min. (l./min.) | Flow rate min. (l./min.) 5 | Flow rate min. (l./min.) 5 | Flow rate min. (l./min.) 5 | Flow rate min. (l./min.) 5 |
Max flow (l./min.) | Max flow (l./min.) 80 | Max flow (l./min.) 80 | Max flow (l./min.) 80 | Max flow (l./min.) 120 |
Min head (m.) | Min head (m.) 10 | Min head (m.) 5 | Min head (m.) 12 | Min head (m.) 5 |
Max head (m.) | Max head (m.) 52 | Max head (m.) 40 | Max head (m.) 67 | Max head (m.) 38 |
Employments | Employments water supply, pressurization systems, irrigation | Employments water supply, pressurization systems, irrigation | Employments water supply, pressurization systems, irrigation | Employments water supply, pressurization systems, irrigation |
Liquid temperature max. (° C) | Liquid temperature max. (° C) 40 | Liquid temperature max. (° C) 40 | Liquid temperature max. (° C) 40 | Liquid temperature max. (° C) 40 |
Height (cm) | Height (cm) 18.2 | Height (cm) 18.2 | Height (cm) 20.2 | Height (cm) 18.2 |
Width (cm) | Width (cm) 18.2 | Width (cm) 18.2 | Width (cm) 18.2 | Width (cm) 18.2 |
Depth (cm) | Depth (cm) 38.6 | Depth (cm) 36.1 | Depth (cm) 41.1 | Depth (cm) 36.1 |
Weight kg) | Weight kg) 7.7 | Weight kg) 7.3 | Weight kg) 10.6 | Weight kg) 7.3 |
Guarantee | Guarantee Two years | Guarantee Two years | Guarantee Two years | Guarantee Two years |