2CP 25 / 130N - Three-phase twin impeller centrifugal pump
Flow rate up to 100 l / min (6 m³ / h). Head up to 42 m. 0.75 Kw (1 HP) motor.
The PEDROLLO pumps of the 2CP line are recommended for pumping clean water and liquids that are chemically non-aggressive to the materials making up the pump.
The PEDROLLO 2CP 25 / 130N has a flow rate that varies from 20 to 100 liters per minute with a prevalence from 39 to 15 meters.
The high yields and adaptability to the most varied applications, even anomalous ones, make it an ideal choice in the domestic, civil, industrial sector; in particular for the distribution of water in conjunction with autoclave tanks, for increasing the pressure in the network, for fire-fighting units.
The installation must be carried out in closed places or in any case protected from bad weather.
- Motor connection
- THREE-PHASE
- Motor power (HP)
- 1
- Absorption at 230V (A)
- 4.6
- Absorption at 400V (A)
- 2.6
- Suction mouth
- 1 "1/4
- Delivery port
- 1 "
- Body Pump
- Cast iron
- Impeller
- AISI 304 stainless steel
- Number of impellers
- 2
- Motor shaft
- Stainless steel EN 10088-3 1.4104
- Check valve
- no
- Degree of protection
- IP 44
- Flow rate min. (l./min.)
- 20
- Max flow (l./min.)
- 100
- Min head (m.)
- 15
- Max head (m.)
- 42
- Employments
- water supply, pressurization systems, fire prevention systems
- Liquid temperature max. (° C)
- 90
- Height (cm)
- 20.1
- Width (cm)
- 18
- Depth (cm)
- 33
- Weight kg)
- 14.4
- Guarantee
- Two years
|
|
|
|
|
Bearings
Pump side motor bearing | 6203 ZZ |
Opposite side motor bearing | 6203 ZZ |
Shaft seal
Type of seal | Single Mechanical Seal |
Pump side model | AR-14 |
LP diameter | 14 |
Fixed ring LP | Ceramic |
Rotating ring LP | Graphite |
LP elastomer | NBR |
Materials
1.0 - Pump Body | Cast iron GJL 200 EN 1561 |
2.1 - Seal holder cover | EN 1.4301 stainless steel (AISI 304) |
3.0 - Impeller | EN 1.4301 stainless steel (AISI 304) |
4.0 - Pump shaft | EN 1.4057 stainless steel (AISI 431) |
5.1 - Diffuser | EN 1.4301 stainless steel (AISI 304) |
5.2 - Shim Ring | PTFE |
6.0 - Motor holder | Aluminum EN-AB 46100 |
6.1 - Engine cover | Aluminum EN-AB 46100 |
7.0 - Lantern | Aluminum EN-AB 46100 |
Compare with Similar Products
2CP 25 / 130N - Three-phase twin impeller centrifugal pumpThis product Flow rate up to 100 l / min (6 m³ / h). Head up to 42 m. 0.75 Kw (1 HP) motor. | 2CP 25 / 14B - Three-phase twin impeller centrifugal pumpFlow rate up to 100 l / min (6 m³ / h). Head up to 54 m. 1.1 Kw (1.5 HP) engine. | 2CP 25 / 14A - Three-phase twin impeller centrifugal pumpFlow rate up to 100 l / min (6 m³ / h). Head up to 67 m. 1.5 Kw (2 HP) motor. | |
---|---|---|---|
Motor connection | Motor connection THREE-PHASE | Motor connection THREE-PHASE | Motor connection THREE-PHASE |
Motor power (HP) | Motor power (HP) 1 | Motor power (HP) 1.5 | Motor power (HP) 2 |
Absorption at 230V (A) | Absorption at 230V (A) 4.6 | Absorption at 230V (A) 5.4 | Absorption at 230V (A) 6.9 |
Absorption at 400V (A) | Absorption at 400V (A) 2.6 | Absorption at 400V (A) 3.1 | Absorption at 400V (A) 4.0 |
Suction mouth | Suction mouth 1 "1/4 | Suction mouth 1 "1/4 | Suction mouth 1 "1/4 |
Delivery port | Delivery port 1 " | Delivery port 1 " | Delivery port 1 " |
Body Pump | Body Pump Cast iron | Body Pump Cast iron | Body Pump Cast iron |
Impeller | Impeller AISI 304 stainless steel | Impeller Brass | Impeller Brass |
Number of impellers | Number of impellers 2 | Number of impellers 2 | Number of impellers 2 |
Motor shaft | Motor shaft Stainless steel EN 10088-3 1.4104 | Motor shaft Stainless steel EN 10088-3 1.4104 | Motor shaft Stainless steel EN 10088-3 1.4104 |
Check valve | Check valve no | Check valve no | Check valve no |
Degree of protection | Degree of protection IP 44 | Degree of protection IP 44 | Degree of protection IP 44 |
Flow rate min. (l./min.) | Flow rate min. (l./min.) 20 | Flow rate min. (l./min.) 20 | Flow rate min. (l./min.) 20 |
Max flow (l./min.) | Max flow (l./min.) 100 | Max flow (l./min.) 100 | Max flow (l./min.) 100 |
Min head (m.) | Min head (m.) 15 | Min head (m.) 22 | Min head (m.) 32 |
Max head (m.) | Max head (m.) 42 | Max head (m.) 54 | Max head (m.) 67 |
Employments | Employments water supply, pressurization systems, fire prevention systems | Employments water supply, pressurization systems, fire prevention systems | Employments water supply, pressurization systems, fire prevention systems |
Liquid temperature max. (° C) | Liquid temperature max. (° C) 90 | Liquid temperature max. (° C) 90 | Liquid temperature max. (° C) 90 |
Height (cm) | Height (cm) 20.1 | Height (cm) 22.3 | Height (cm) 26.1 |
Width (cm) | Width (cm) 18 | Width (cm) 20 | Width (cm) 22.5 |
Depth (cm) | Depth (cm) 33 | Depth (cm) 40.4 | Depth (cm) 40.4 |
Weight kg) | Weight kg) 14.4 | Weight kg) 18.8 | Weight kg) 23.5 |
Guarantee | Guarantee Two years | Guarantee Two years | Guarantee Two years |