BC 15/50-MF - electric Pump for sewage water with dual-CHANNEL three-phase
Flow rates up to 750 l/min (45 m3/h). Head up to 14 m. Motor 1.1 Kw (1.5 HP).
The submersible pumps BC-MF are recommended for draining dirty water and sewage in the areas of domestic and civil.
Are equipped with twin-CHANNEL that allows the pumping of liquids with suspended solids up to Ø 50 mm of short fibers.
Are suitable for the conveyance of waste water and sewage, waste water, surface water, water mixed with mud in uses such as: holiday homes, villas, single-family houses.
These pumps distinguish themselves for their reliability, in particular in fixed installations with automatic operation.
- Motor connection
- THREE-PHASE
- Motor power (HP)
- 1.5
- Absorption at 400V (A)
- 3.2
- Delivery port
- 2"
- Body Pump
- AISI 304 stainless steel
- Impeller
- AISI 304 stainless steel
- Number of impellers
- 1
- Motor shaft
- AISI 304 stainless steel
- Check valve
- no
- Degree of protection
- IP 68
- Flow rate min. (l./min.)
- 50
- Max flow (l./min.)
- 750
- Min head (m.)
- 2
- Cable length (m)
- 10
- Employments
- drainage, drying up, slightly dirty waters
- Liquid temperature max. (° C)
- +40°C
- Height (cm)
- 44.7
- Weight kg)
- 14.3
- Guarantee
- Two years
|
|
|
|
|
|
Bearings
Pump side motor bearing | 6203 2RS - C3 |
Opposite side engine bearing | 6203 ZZ |
Tree holding
Type of seal | Double mechanical seal in oil chamber |
LM diameter | 14 |
LM fixed ring | Silicon carbide |
LM rotating ring | Graphite |
LM elastomer | NBR |
Shrinkage DN1=450 DN2=350 | MG1-14D SIC |
LP diameter | 14 |
LP fixed ring | Silicon carbide |
LP rotating ring | Silicon carbide |
LP elastomer | NBR |
Materials
1.0 - Pump body | Stainless steel EN 1.4404 (AISI 316L) |
1.4 - Basic | Stainless steel EN 1.4301 (AISI 304) |
3.0 - Impeller | Stainless steel EN 1.4301 (AISI 304) |
4.0 - Pump shaft | Stainless steel EN 1.4404 (AISI 316L) |
6.0 - Motor holder | Stainless steel EN 1.4301 (AISI 304) |
6.1 - Engine cover | Stainless steel EN 1.4301 (AISI 304) |
7.0 - Lantern | Cast iron GJL 200 EN 1561 |
Compare with Similar Products
BC 15/50-MF - electric Pump for sewage water with dual-CHANNEL three-phaseThis product Flow rates up to 750 l/min (45 m3/h). Head up to 14 m. Motor 1.1 Kw (1.5 HP). | BC 10/50-MF - electric Pump for sewage water with dual-CHANNEL three-phaseFlow rate up to 600 l/min (36 m3/h). Head up to 11 m. Motor 0.75 Kw (1 HP). | |
---|---|---|
Motor connection | Motor connection THREE-PHASE | Motor connection THREE-PHASE |
Motor power (HP) | Motor power (HP) 1.5 | Motor power (HP) 1 |
Absorption at 400V (A) | Absorption at 400V (A) 3.2 | Absorption at 400V (A) 2.1 |
Delivery port | Delivery port 2" | Delivery port 2" |
Body Pump | Body Pump AISI 304 stainless steel | Body Pump AISI 304 stainless steel |
Impeller | Impeller AISI 304 stainless steel | Impeller AISI 304 stainless steel |
Number of impellers | Number of impellers 1 | Number of impellers 1 |
Motor shaft | Motor shaft AISI 304 stainless steel | Motor shaft AISI 304 stainless steel |
Check valve | Check valve no | Check valve no |
Degree of protection | Degree of protection IP 68 | Degree of protection IP 68 |
Flow rate min. (l./min.) | Flow rate min. (l./min.) 50 | Flow rate min. (l./min.) 50 |
Max flow (l./min.) | Max flow (l./min.) 750 | Max flow (l./min.) 600 |
Min head (m.) | Min head (m.) 2 | Min head (m.) 2 |
Max head (m.) | Max head (m.) -- | Max head (m.) 12 |
Cable length (m) | Cable length (m) 10 | Cable length (m) 10 |
Employments | Employments drainage, drying up, slightly dirty waters | Employments slightly dirty waters, drainage, drying up |
Liquid temperature max. (° C) | Liquid temperature max. (° C) +40°C | Liquid temperature max. (° C) 40 |
Height (cm) | Height (cm) 44.7 | Height (cm) 43.1 |
Weight kg) | Weight kg) 14.3 | Weight kg) 13.8 |
Guarantee | Guarantee Two years | Guarantee Two years |