CP 170 - centrifugal electric Pump three-phase
Flow rate up to 120 l/min (7.2 m3/h). Head up to 41 m. Motor 1.1 Kw (1.5 HP).
Buy it now and receive it between on 01-04-2024 and 02-04-2024 with Corriere TNT - Tariffa ECONOMY
It is recommended for pumping clean water without abrasive particles and liquids chemically non aggressive to the materials making up the pump.
For reliability and ease-of-use are widely used in the domestic sector and civil society, in particular for the distribution of water coupled to small and medium-sized reservoirs, surge tanks, for decanting and for irrigation of orchards and gardens.
The installation is to be carried out indoors or otherwise protected from the weather.
- Motor connection
- THREE-PHASE
- Motor power (HP)
- 1.5
- Absorption at 230V (A)
- 5.2
- Absorption at 400V (A)
- 3.0
- Suction mouth
- 1 "1/4
- Delivery port
- 1 "
- Body Pump
- Cast iron
- Impeller
- AISI 304 stainless steel
- Number of impellers
- 1
- Motor shaft
- Stainless steel EN 10088-3 1.4104
- Check valve
- no
- Degree of protection
- IP 44
- Flow rate min. (l./min.)
- 30
- Max flow (l./min.)
- 120
- Min head (m.)
- 22
- Max head (m.)
- 41
- Employments
- water supply, pressurization systems, irrigation, cooling systems, air conditioning systems, transfer of tanks
- Liquid temperature max. (° C)
- 90
- Motor voltage
- 400 V
- Height (cm)
- 26
- Width (cm)
- 20.6
- Depth (cm)
- 36.7
- Weight kg)
- 17.8
- Guarantee
- Two years
|
|
|
|
|
Bearings
Pump side motor bearing | 6204 ZZ |
Opposite side motor bearing | 6204 ZZ |
Shaft seal
Type of seal | Single Mechanical Seal |
Pump side model | FN-18 |
LP diameter | 18 |
Fixed ring LP | Graphite |
Rotating ring LP | Ceramic |
LP elastomer | NBR |
Mat
1.0 - Pump Body | Cast iron GJL 200 EN 1561 |
2.1 - Seal holder cover | Cast iron GJL 200 EN 1561 |
3.0 - Impeller | EN 1.4301 stainless steel (AISI 304) |
4.0 - Pump shaft | EN 1.4057 stainless steel (AISI 431) |
6.0 - Motor holder | Aluminum EN-AB 46100 |
6.1 - Engine cover | Aluminum EN-AB 46100 |
7.0 - Lantern | Aluminum EN-AB 46100 |
Compare with Similar Products
CP 170 - centrifugal electric Pump three-phaseThis product Flow rate up to 120 l/min (7.2 m3/h). Head up to 41 m. Motor 1.1 Kw (1.5 HP). | CP 158 - centrifugal electric Pump three-phaseFlow rate up to 90 l/min (5.4 m3/h). Head up to 36 m. Motor 0.75 Kw (1 HP). | CP 170M - centrifugal electric Pump three-phaseFlow rate up to 160 l/min (9.6 m3/h). Head up to 36 m. Motor 1.1 Kw (1.5 HP). | CP 190 - centrifugal electric Pump three-phaseFlow rate up to 140 l/min (8.4 m3/h). Head up to 48 m. Motor 1.5 Kw (2 HP). | |
---|---|---|---|---|
Motor connection | Motor connection THREE-PHASE | Motor connection THREE-PHASE | Motor connection THREE-PHASE | Motor connection THREE-PHASE |
Motor power (HP) | Motor power (HP) 1.5 | Motor power (HP) 1 | Motor power (HP) 1.5 | Motor power (HP) 2 |
Absorption at 230V (A) | Absorption at 230V (A) 5.2 | Absorption at 230V (A) 4.4 | Absorption at 230V (A) 5.2 | Absorption at 230V (A) 7.5 |
Absorption at 400V (A) | Absorption at 400V (A) 3.0 | Absorption at 400V (A) 2.5 | Absorption at 400V (A) 3.0 | Absorption at 400V (A) 4.3 |
Suction mouth | Suction mouth 1 "1/4 | Suction mouth 1 " | Suction mouth 1 "1/4 | Suction mouth 1 "1/4 |
Delivery port | Delivery port 1 " | Delivery port 1 " | Delivery port 1 " | Delivery port 1 " |
Body Pump | Body Pump Cast iron | Body Pump Cast iron | Body Pump Cast iron | Body Pump Cast iron |
Impeller | Impeller AISI 304 stainless steel | Impeller AISI 304 stainless steel | Impeller AISI 304 stainless steel | Impeller AISI 304 stainless steel |
Number of impellers | Number of impellers 1 | Number of impellers 1 | Number of impellers 1 | Number of impellers 1 |
Motor shaft | Motor shaft Stainless steel EN 10088-3 1.4104 | Motor shaft Stainless steel EN 10088-3 1.4104 | Motor shaft Stainless steel EN 10088-3 1.4104 | Motor shaft Stainless steel EN 10088-3 1.4104 |
Check valve | Check valve no | Check valve no | Check valve no | Check valve no |
Degree of protection | Degree of protection IP 44 | Degree of protection IP 44 | Degree of protection IP 55 | Degree of protection IP 44 |
Flow rate min. (l./min.) | Flow rate min. (l./min.) 30 | Flow rate min. (l./min.) 10 | Flow rate min. (l./min.) 30 | Flow rate min. (l./min.) 30 |
Max flow (l./min.) | Max flow (l./min.) 120 | Max flow (l./min.) 90 | Max flow (l./min.) 160 | Max flow (l./min.) 140 |
Min head (m.) | Min head (m.) 22 | Min head (m.) 25 | Min head (m.) 19 | Min head (m.) 26 |
Max head (m.) | Max head (m.) 41 | Max head (m.) 36 | Max head (m.) 36 | Max head (m.) 48 |
Employments | Employments water supply, pressurization systems, irrigation, cooling systems, air conditioning systems, transfer of tanks | Employments water supply, pressurization systems, irrigation, cooling systems, air conditioning systems, transfer of tanks | Employments water supply, pressurization systems, irrigation, cooling systems, air conditioning systems, transfer of tanks | Employments water supply, pressurization systems, irrigation, cooling systems, air conditioning systems, transfer of tanks |
Liquid temperature max. (° C) | Liquid temperature max. (° C) 90 | Liquid temperature max. (° C) 90 | Liquid temperature max. (° C) +90°C | Liquid temperature max. (° C) 90 |
Motor voltage | Motor voltage 400 V | Motor voltage 400 V | Motor voltage 400 V | Motor voltage 230 V |
Height (cm) | Height (cm) 26 | Height (cm) 24 | Height (cm) 26 | Height (cm) 29 |
Width (cm) | Width (cm) 20.6 | Width (cm) 19 | Width (cm) 36.7 | Width (cm) 24.2 |
Depth (cm) | Depth (cm) 36.7 | Depth (cm) 28.5 | Depth (cm) 20.6 | Depth (cm) 36.4 |
Weight kg) | Weight kg) 17.8 | Weight kg) 12 | Weight kg) 17.2 | Weight kg) 21.3 |
Guarantee | Guarantee Two years | Guarantee Two years | Guarantee Two years | Guarantee Two years |