chevron_left chevron_right
CPm 210C - centrifugal electric Pump, single phase
Flow up to 250 l/min (15 m3/h). Head up to 46 m. Motor 2.2 Kw (3 HP).
There are no reviews yet
Telephone support for information before purchasing.
Reinforced packaging to reduce transport damage.
After-sales assistance for product installation.
We supply all spare parts on this product.
Description
It is recommended for pumping clean water without abrasive particles and liquids chemically non aggressive to the materials making up the pump.
For reliability and ease-of-use are widely used in the domestic sector and civil society, in particular for the distribution of water coupled to small and medium-sized reservoirs, surge tanks, for decanting and for irrigation of orchards and gardens.
The installation is to be carried out indoors or otherwise protected from the weather.
Data sheet
- Motor connection
- SINGLE PHASE
- Motor power (HP)
- 3
- Absorption at 230V (A)
- 14.5
- Capacitor
- 70 µF450 VL
- Suction mouth
- 1 "1/2
- Delivery port
- 1 "
- Body Pump
- Cast iron
- Impeller
- Brass
- Number of impellers
- 1
- Motor shaft
- Stainless steel EN 10088-3 1.4104
- Check valve
- no
- Degree of protection
- IP 44
- Flow rate min. (l./min.)
- 50
- Max flow (l./min.)
- 250
- Min head (m.)
- 27
- Max head (m.)
- 46
- Employments
- water supply, pressurization systems, irrigation, cooling systems, air conditioning systems, transfer of tanks
- Liquid temperature max. (° C)
- +90°C
- Motor voltage
- 230 V
- Height (cm)
- 30.5
- Width (cm)
- 40.2
- Depth (cm)
- 25.2
- Weight kg)
- 29
- Guarantee
- Two years
Construction data of the CP 210C-210B-210A
Bearings
| Pump side motor bearing | 6206 ZZ - C3 |
| Opposite side motor bearing | 6205 ZZ |
Shaft seal
| Type of seal | Single Mechanical Seal |
| Pump side model | FN-24 |
| LP diameter | 24 |
| Fixed ring LP | Graphite |
| Rotating ring LP | Ceramic |
| LP elastomer | NBR |
Mat
| 1.0 - Pump Body | Cast iron GJL 200 EN 1561 |
| 3.0 - Impeller | Brass CW617N EN 12165 |
| 4.0 - Pump shaft | EN 1.4057 stainless steel (AISI 431) |
| 6.0 - Motor holder | Aluminum EN-AB 46100 |
| 6.1 - Engine cover | Aluminum EN-AB 46100 |
| 7.0 - Lantern | Cast iron GJL 200 EN 1561 |
Compare with Similar Products
 CPm 210C - centrifugal electric Pump, single phaseThis product Flow up to 250 l/min (15 m3/h). Head up to 46 m. Motor 2.2 Kw (3 HP). |  CPm 160C - centrifugal electric Pump, single phaseFlow rates up to 200 l/min (12 m3/h). Head up to 32 m. Motor 1.1 Kw (1.5 HP). |  CPm 160B - centrifugal electric Pump, single phaseFlow rate up to 220 l/min (13.2 m3/h). Head up to 37 m. Motor 1.5 Kw (2 HP). |  CPm 220C - centrifugal electric Pump, single phaseSingle-PHASE The field of performance Flow rate up to 450 l/min (27 m3/h) Head up to 32 m Motor 2.2 Kw (3 HP) Pumped liquid: clean water Use: civil, industrial, agricultural | |
|---|---|---|---|---|
| Motor connection | Motor connection SINGLE PHASE | Motor connection SINGLE PHASE | Motor connection SINGLE PHASE | Motor connection SINGLE PHASE |
| Motor power (HP) | Motor power (HP) 3 | Motor power (HP) 1.5 | Motor power (HP) 2 | Motor power (HP) 3 |
| Absorption at 230V (A) | Absorption at 230V (A) 14.5 | Absorption at 230V (A) 8.6 | Absorption at 230V (A) 10.3 | Absorption at 230V (A) 15.8 |
| Capacitor | Capacitor 70 µF450 VL | Capacitor 31.5 µF450 VL | Capacitor 45 µF450 VL | Capacitor 70 µF450 VL |
| Suction mouth | Suction mouth 1 "1/2 | Suction mouth 1 "1/2 | Suction mouth 1 "1/2 | Suction mouth 2" |
| Delivery port | Delivery port 1 " | Delivery port 1 " | Delivery port 1 " | Delivery port 2" |
| Body Pump | Body Pump Cast iron | Body Pump Cast iron | Body Pump Cast iron | Body Pump Cast iron |
| Impeller | Impeller Brass | Impeller AISI 304 stainless steel | Impeller AISI 304 stainless steel | Impeller Brass |
| Number of impellers | Number of impellers 1 | Number of impellers 1 | Number of impellers 1 | Number of impellers 1 |
| Motor shaft | Motor shaft Stainless steel EN 10088-3 1.4104 | Motor shaft Stainless steel EN 10088-3 1.4104 | Motor shaft Stainless steel EN 10088-3 1.4104 | Motor shaft Stainless steel EN 10088-3 1.4104 |
| Check valve | Check valve no | Check valve no | Check valve no | Check valve no |
| Degree of protection | Degree of protection IP 44 | Degree of protection IP 55 | Degree of protection IP 44 | Degree of protection IP 55 |
| Flow rate min. (l./min.) | Flow rate min. (l./min.) 50 | Flow rate min. (l./min.) 50 | Flow rate min. (l./min.) 50 | Flow rate min. (l./min.) 50 |
| Max flow (l./min.) | Max flow (l./min.) 250 | Max flow (l./min.) 200 | Max flow (l./min.) 220 | Max flow (l./min.) 450 |
| Min head (m.) | Min head (m.) 27 | Min head (m.) 20 | Min head (m.) 23 | Min head (m.) 21 |
| Max head (m.) | Max head (m.) 46 | Max head (m.) 32 | Max head (m.) 37 | Max head (m.) 32 |
| Employments | Employments water supply, pressurization systems, irrigation, cooling systems, air conditioning systems, transfer of tanks | Employments water supply, pressurization systems, irrigation, cooling systems, air conditioning systems, transfer of tanks | Employments water supply, pressurization systems, irrigation, cooling systems, air conditioning systems, transfer of tanks | Employments water supply, pressurization systems, irrigation, cooling systems, air conditioning systems, transfer of tanks |
| Liquid temperature max. (° C) | Liquid temperature max. (° C) +90°C | Liquid temperature max. (° C) 90 | Liquid temperature max. (° C) 90 | Liquid temperature max. (° C) 90 |
| Motor voltage | Motor voltage 230 V | Motor voltage 230 V | Motor voltage 230 V | Motor voltage 230 V |
| Height (cm) | Height (cm) 30.5 | Height (cm) 26 | Height (cm) 26 | Height (cm) 31.5 |
| Width (cm) | Width (cm) 40.2 | Width (cm) 20.7 | Width (cm) 20.7 | Width (cm) 25.5 |
| Depth (cm) | Depth (cm) 25.2 | Depth (cm) 37.3 | Depth (cm) 37.3 | Depth (cm) 44.1 |
| Weight kg) | Weight kg) 29 | Weight kg) 19.7 | Weight kg) 21 | Weight kg) 31.9 |
| Guarantee | Guarantee Two years | Guarantee Two years | Guarantee Two years | Guarantee Two years |
