HF 8A - centrifugal electric Pump three-phase
Flow rate up to 1200 l/min (72 m3/h). Head up to 24 m. Motor 4 Kw (5.5 HP)
Pumps PEDROLLO of the line HF high flow rates, are recommended for civil, agricultural and.
The PEDROLLO HF 8A has a range that varies from 200 to 1200 liters per minute, with a prevalence from 24 to 13 metres.
The high yields achievable and the possibility of a continuous use make it beneficial to the use of this pump for the irrigation or rain, for the withdrawal of water from lakes, rivers, wells and for a wide range of industrial uses that are characterized by the need to achieve large flow in the prevalence ratio low-medium
The installation is to be carried out indoors or otherwise protected from the weather.
- Motor connection
- THREE-PHASE
- Motor power (HP)
- 4
- Absorption at 230V (A)
- 15.8
- Absorption at 400V (A)
- 9.1
- Suction mouth
- 4 "
- Delivery port
- 4 "
- Body Pump
- Cast iron
- Impeller
- Brass
- Number of impellers
- 1
- Motor shaft
- AISI 431 stainless steel
- Check valve
- no
- Degree of protection
- IP 44
- Flow rate min. (l./min.)
- 200
- Max flow (l./min.)
- 1200
- Min head (m.)
- 13
- Max head (m.)
- 24.5
- Employments
- water supply, irrigation, cooling systems, transfer of tanks
- Liquid temperature max. (° C)
- +90°C
- Motor voltage
- 400 V
- Height (cm)
- 31.2
- Width (cm)
- 47.4
- Depth (cm)
- 24.5
- Weight kg)
- 40
- Guarantee
- Two years
|
|
|
|
|
Bearings
Pump side motor bearing | 6306 ZZ - C3 |
Opposite side motor bearing | 6206 ZZ - C3 |
Shaft seal
Type of seal | Single Mechanical Seal |
Pump side model | FN-20 |
LP diameter | 20 |
Fixed ring LP | Graphite |
Rotating ring LP | Ceramic |
LP elastomer | NBR |
Mat
1.0 - Pump Body | Cast iron GJL 200 EN 1561 |
2.1 - Seal holder cover | Cast iron GJL 200 EN 1561 |
3.0 - Impeller | Brass CW617N EN 12165 |
4.0 - Pump shaft | EN 1.4057 stainless steel (AISI 431) |
6.0 - Motor holder | Aluminum EN-AB 46100 |
6.1 - Engine cover | Aluminum EN-AB 46100 |
7.0 - Lantern | Aluminum EN-AB 46100 |
Compare with Similar Products
HF 8A - centrifugal electric Pump three-phaseThis product Flow rate up to 1200 l/min (72 m3/h). Head up to 24 m. Motor 4 Kw (5.5 HP) | HF-6A - centrifugal electric Pump three-phaseFlow rate up to 1200 l/min (72 m3/h). Head up to 18.1 m. Motor 2.2 Kw (3 HP). | HF 8B - centrifugal electric Pump three-phaseFlow rate up to 1200 l/min (72 m3/h). Head up to 21 m. Engine 3 Kw (4 HP). | |
---|---|---|---|
Motor connection | Motor connection THREE-PHASE | Motor connection THREE-PHASE | Motor connection THREE-PHASE |
Motor power (HP) | Motor power (HP) 4 | Motor power (HP) 3 | Motor power (HP) 4 |
Absorption at 230V (A) | Absorption at 230V (A) 15.8 | Absorption at 230V (A) 9.0 | Absorption at 230V (A) 12.1 |
Absorption at 400V (A) | Absorption at 400V (A) 9.1 | Absorption at 400V (A) 5.2 | Absorption at 400V (A) 7.0 |
Suction mouth | Suction mouth 4 " | Suction mouth 3 " | Suction mouth 4 " |
Delivery port | Delivery port 4 " | Delivery port 3 " | Delivery port 4 " |
Body Pump | Body Pump Cast iron | Body Pump Cast iron | Body Pump Cast iron |
Impeller | Impeller Brass | Impeller Brass | Impeller Brass |
Number of impellers | Number of impellers 1 | Number of impellers 1 | Number of impellers 1 |
Motor shaft | Motor shaft AISI 431 stainless steel | Motor shaft AISI 431 stainless steel | Motor shaft AISI 431 stainless steel |
Check valve | Check valve no | Check valve no | Check valve no |
Degree of protection | Degree of protection IP 44 | Degree of protection IP 44 | Degree of protection IP 44 |
Flow rate min. (l./min.) | Flow rate min. (l./min.) 200 | Flow rate min. (l./min.) 200 | Flow rate min. (l./min.) 200 |
Max flow (l./min.) | Max flow (l./min.) 1200 | Max flow (l./min.) 1200 | Max flow (l./min.) 1200 |
Min head (m.) | Min head (m.) 13 | Min head (m.) 6 | Min head (m.) 9 |
Max head (m.) | Max head (m.) 24.5 | Max head (m.) 18.5 | Max head (m.) 21.5 |
Employments | Employments water supply, irrigation, cooling systems, transfer of tanks | Employments water supply, irrigation, cooling systems, transfer of tanks | Employments water supply, irrigation, cooling systems, transfer of tanks |
Liquid temperature max. (° C) | Liquid temperature max. (° C) +90°C | Liquid temperature max. (° C) +90°C | Liquid temperature max. (° C) +90°C |
Motor voltage | Motor voltage 400 V | Motor voltage 400 V | Motor voltage 400 V |
Height (cm) | Height (cm) 31.2 | Height (cm) 31.2 | Height (cm) 31.2 |
Width (cm) | Width (cm) 47.4 | Width (cm) 42.9 | Width (cm) 44.5 |
Depth (cm) | Depth (cm) 24.5 | Depth (cm) 24 | Depth (cm) 24.5 |
Weight kg) | Weight kg) 40 | Weight kg) 26.7 | Weight kg) 35 |
Guarantee | Guarantee Two years | Guarantee Two years | Guarantee Two years |