HFm 5BM - centrifugal electric Pump, single phase
Flow rate up to 600 l/min (36 m3/h). Head up to 18.5 m. Motor 1.1 Kw (1.5 HP).
Pumps PEDROLLO of the line HF medium flow rate, are recommended for civil, agricultural and.
The PEDROLLO HF 5BM has a range that varies from 100 to 600 liters per minute, with a prevalence from 18.5 to 6 metres.
The high yields achievable and the possibility of a continuous use make it beneficial to the use of this pump for the irrigation or rain, for the withdrawal of water from lakes, rivers, wells and for a wide range of industrial uses that are characterized by the need to achieve large flow in the prevalence ratio low-medium
The installation is to be carried out indoors or otherwise protected from the weather.
- Motor connection
- SINGLE PHASE
- Motor power (HP)
- 1.5
- Absorption at 230V (A)
- 7.7
- Capacitor
- 25 µF450 VL
- Suction mouth
- 2"
- Delivery port
- 2"
- Body Pump
- Cast iron
- Impeller
- Brass
- Number of impellers
- 1
- Motor shaft
- AISI 431 stainless steel
- Check valve
- no
- Degree of protection
- IP 44
- Flow rate min. (l./min.)
- 50
- Max flow (l./min.)
- 600
- Min head (m.)
- 6
- Max head (m.)
- 19
- Employments
- water supply, irrigation, cooling systems, transfer of tanks
- Liquid temperature max. (° C)
- 90
- Motor voltage
- 230 V
- Height (cm)
- 26
- Width (cm)
- 38.6
- Depth (cm)
- 20.8
- Weight kg)
- 19.2
- Guarantee
- Two years
|
|
|
|
|
Bearings
Pump side motor bearing | 6204 ZZ |
Opposite side motor bearing | 6204 ZZ |
Shaft seal
Type of seal | Single Mechanical Seal |
Pump side model | FN-18 |
LP diameter | 18 |
Fixed ring LP | Graphite |
Rotating ring LP | Ceramic |
LP elastomer | NBR |
Mat
1.0 - Pump Body | Cast iron GJL 200 EN 1561 |
2.1 - Seal holder cover | Cast iron GJL 200 EN 1561 |
3.0 - Impeller | Brass CW617N EN 12165 |
4.0 - Pump shaft | EN 1.4057 stainless steel (AISI 431) |
6.0 - Motor holder | Aluminum EN-AB 46100 |
6.1 - Engine cover | Aluminum EN-AB 46100 |
7.0 - Lantern | Aluminum EN-AB 46100 |
Compare with Similar Products
HFm 5BM - centrifugal electric Pump, single phaseThis product Flow rate up to 600 l/min (36 m3/h). Head up to 18.5 m. Motor 1.1 Kw (1.5 HP). | HFm 5B - centrifugal electric Pump, single phaseFlow rate up to 500 l/min (30 m3/h). Head up to 13.2 m. Motor 0.75 Kw (1 HP). | HFm 5A - centrifugal electric Pump, single phaseFlow rate up to 600 l/min (36 m3/h). Head up to 13.8 m. Motor 1.1 Kw (1.5 HP). | HFm 5AM - centrifugal electric Pump, single phaseFlow rate up to 600 l/min (36 m3/h). Head up to 21.5 m. Motor 1.5 Kw (2 HP). | |
---|---|---|---|---|
Motor connection | Motor connection SINGLE PHASE | Motor connection SINGLE PHASE | Motor connection SINGLE PHASE | Motor connection SINGLE PHASE |
Motor power (HP) | Motor power (HP) 1.5 | Motor power (HP) 1 | Motor power (HP) 1.5 | Motor power (HP) 2 |
Absorption at 230V (A) | Absorption at 230V (A) 7.7 | Absorption at 230V (A) 4.9 | Absorption at 230V (A) 6.2 | Absorption at 230V (A) 10.1 |
Capacitor | Capacitor 25 µF450 VL | Capacitor 20 µF450 VL | Capacitor 25 µF450 VL | Capacitor 45 µF450 VL |
Suction mouth | Suction mouth 2" | Suction mouth 2" | Suction mouth 2" | Suction mouth 2" |
Delivery port | Delivery port 2" | Delivery port 2" | Delivery port 2" | Delivery port 2" |
Body Pump | Body Pump Cast iron | Body Pump Cast iron | Body Pump Cast iron | Body Pump Cast iron |
Impeller | Impeller Brass | Impeller Brass | Impeller Brass | Impeller Brass |
Number of impellers | Number of impellers 1 | Number of impellers 1 | Number of impellers 1 | Number of impellers 1 |
Motor shaft | Motor shaft AISI 431 stainless steel | Motor shaft AISI 431 stainless steel | Motor shaft Stainless steel EN 10088-3 1.4104 | Motor shaft AISI 431 stainless steel |
Check valve | Check valve no | Check valve no | Check valve no | Check valve no |
Degree of protection | Degree of protection IP 44 | Degree of protection IP 44 | Degree of protection IP 44 | Degree of protection IP 44 |
Flow rate min. (l./min.) | Flow rate min. (l./min.) 50 | Flow rate min. (l./min.) 50 | Flow rate min. (l./min.) 100 | Flow rate min. (l./min.) 50 |
Max flow (l./min.) | Max flow (l./min.) 600 | Max flow (l./min.) 500 | Max flow (l./min.) 600 | Max flow (l./min.) 600 |
Min head (m.) | Min head (m.) 6 | Min head (m.) 5 | Min head (m.) 3 | Min head (m.) 10 |
Max head (m.) | Max head (m.) 19 | Max head (m.) 13.7 | Max head (m.) 14.5 | Max head (m.) 22 |
Employments | Employments water supply, irrigation, cooling systems, transfer of tanks | Employments water supply, irrigation, cooling systems, transfer of tanks | Employments water supply, irrigation, cooling systems, transfer of tanks | Employments water supply, irrigation, cooling systems, transfer of tanks |
Liquid temperature max. (° C) | Liquid temperature max. (° C) 90 | Liquid temperature max. (° C) 90 | Liquid temperature max. (° C) 90 | Liquid temperature max. (° C) 90 |
Motor voltage | Motor voltage 230 V | Motor voltage 230 V | Motor voltage 230 V | Motor voltage 230 V |
Height (cm) | Height (cm) 26 | Height (cm) 23.8 | Height (cm) 23.8 | Height (cm) 26 |
Width (cm) | Width (cm) 38.6 | Width (cm) 6.31 | Width (cm) 6.31 | Width (cm) 38.6 |
Depth (cm) | Depth (cm) 20.8 | Depth (cm) 19.2 | Depth (cm) 19.2 | Depth (cm) 20.8 |
Weight kg) | Weight kg) 19.2 | Weight kg) 14.3 | Weight kg) 14.6 | Weight kg) 21.6 |
Guarantee | Guarantee Two years | Guarantee Two years | Guarantee Two years | Guarantee Two years |