• New
    PWM II 230 D / 10.5 - 10.5 A single-phase / three-phase inverter
    • PWM II 230 D / 10.5 - 10.5 A single-phase / three-phase inverter
    • PWM II 230 D / 10.5 - 10.5 A single-phase / three-phase inverter

    PWM II 230 D / 10.5 - 10.5 A single-phase / three-phase inverter

    Review (0)
    €456.55

    Inverter for 230 V three-phase pumps up to 3 HP with single-phase power supply

    Quantity :

    Last time this product was added to a cart: 04/10/2018

     Customer ratings and reviews
     (5/5)  - 1 rating(s) - 1 review(s)
    View distribution

    Telephone assistance for information before purchase.

    After-sales assistance to the installation of the product.

    • Politiche per la sicurezza (modificale nel modulo Rassicurazioni cliente)
    • Politiche per le spedizioni (modificale nel modulo Rassicurazioni cliente)
    • Politiche per i resi (modificale nel modulo Rassicurazioni cliente)

    The PWM II 230 D / 10.5 is an integrated system for the variable speed control (INVERTER) of electric pumps, capable of keeping the pressure constant as the flow rate varies.

    Through the different possible settings and the availability of configurable input and output contacts, it is possible to adapt the operation of the PWM system to the needs of various systems.

    The PWM II 230 D / 10.5 model drives electric pumps with standard three-phase asynchronous motors while being powered by a single-phase line. The power supply voltage of the installed electric pump motor must be 230V 50Hz three-phase. The utility connected to PWM 230 must not exceed 10.5 Arms as phase current.

    WaCS
    88002045
    10 Items

    Data sheet

    Power line
    single phase
    Line voltage
    230 V
    The current line
    22
    Stages of line
    1 x 230 V
    Motor power
    Three phase
    Motor voltage
    230 V
    The motor phases
    3 x 230 V
    Motor power (Kw)
    2.2 Kw
    Meter
    Yes
    Dry running
    Yes
    Height (cm)
    28.2
    Depth (cm)
    18.4
    Flow rate max. (l./min.)
    300
    The mouth of the Suction
    1 "1/4
    Outlet
    1 "1/2
    Warranty
    Two years
    Degree of protection
    IP 55
    A short-circuit between the phases
    Yes
    Width (cm)
    23.7

    Specific References

    Download

    Manual PWM 230-400

    User manual with instructions for installation and use of inverters in series line PWM 230-400 of WaCs.

    Download (697.38k)

    No customer reviews for the moment.

    Write your review
    PWM II 230 D / 10.5 - 10.5 A single-phase / three-phase inverter

    Customers who bought this product also bought:

    Related Products

     Reviews
    By (LAGADAS, Grecia) on 06 Aug. 2019 (PWM II 230 D / 10.5 - 10.5 A single-phase / three-phase inverter) :
    (5/5

    Thank you

    I am fully satisfated with the product and the client support. Thank you very much.

    Report abuse

    Features Active Driver

    Scheda inverter

    Inverter

    The Active Drivers Plus does absorb at the pump, the minimum power required to meet the water demand, thereby avoiding unnecessary wastes and allowing considerable energy savings.

    Display inverter

    Display

    Oled Display for high readability. The intuitive interface allows you to access all the information and customise the main settings according to the the specification.

    Aumento della vita della pompa.

    Increase the life of the pump.

    Thanks to the technology inverter, which reduces the speed of the motor, it has considerable increase of the life of the pump.

    Predisposizione per il funzionamento nei gruppi

    Predisposition to the operation in groups

    The Active Driver Plus is intended for operation in the groups of pressurization. Each pump needs an Active Driver Plus the controls in order to minimize the consumption of electrical power.

    Sensori di flusso e di pressione

    Sensors of pressure and flow

    Transducer electronic pressure and flow sensor integrated. The Active Driver Plus does not require external sensors.

    Valvola di non ritorno

    Non-return valve

    Easily removable for maintenance.

    THE MAIN DIFFERENCES WITH THE PREVIOUS MODEL

    THE PREVIOUS MODEL


    Modello precedente

    NEW MODEL PLUS


    Nuovo modello Plus

    Reliable

    The experience of DAB in mechatronics has been condensed in this product that has been made extremely reliable, handsome and versatile.

    Easy to install

    The experience of DAB in mechatronics has been condensed in this product that has been made extremely reliable, handsome and versatile.

    Easy to set up

    The inverter, using the wizard, it is easily readable on the display, guide the installer to the inclusion of all the necessary parameters and helps in some cases, the definition of the setting is appropriate.

    Trasparenza e valvola di non ritorno dell'Active Driver Plus

    NEW INTERFACE DISPLY AND SOFTWARE

    Software

    Same functionality as the previous version.

    Connectivity with other equipment on all models up to 8 pumps.

    Backward compatibility of software that is able to upgrade its previous versions.

    OLED Display

    Installation wizard and simplified by using the Wizard.

    Improved the usability of the information thanks to the graphic display.

    Better visibility for resolution and high contrast.

    Graphical explanation and description of the parameter.

    Possibility to choose the language of the menu.

    Interface

    New button 'ENABLE' to shut down/restart the machine.

    Interfaccia Active Driver Plus

    NEW CONSTRUCTION OF THE COVER

    Coperchio Active Driver Plus
    1. Cable glands trade replaced the old cable glands moulded providing greater protection.

    2. Added, at the bottom, 3 holes closed for inputs/outputs with screw cap M16.

    3. The external screws of the clamping of the cover, and the area of the seal increase the sealing reliability of the cover.

    Seat OR of the cover with better compression and seal.

    Tenuta ACTIVE DRIVER Plus

    NEW CONSTRUCTION OF THE BODY

    Tappo di scarico dell'Active Driver Plus

    Drain plug and 3/8 "in plastic instead of 1/4" brass hex.

    Sede del sensore dell'Active Driver Plus

    The seat of the pressure sensor is extremely robust.

    NEW CONSTRUCTION OF THE SINK

    1. Improved cooling of the inverter through the increased opening for the passage of water on the sink.



    2. Two models: one for 230 and a 1-Basic and one for 400 and great, and the internal pocket to help the dissipation.



    3. Coupling screws to the card more accessible: allow you to remove the card while maintaining the system under pressure.



    4. Material CW617N instead of CW614N suitable for certification of drinking water in most states.



    Dissipatore dell'Active Driver Plus

    NEW CONSTRUCTION OF THE ELECTRONIC CARD

    Scheda elettronica dell'Active Driver Plus
    1. And increased reliability due to transformer Switching and non-linear, which has also permitted a reduction of the weight.



    2. The cards are unified, and all models have 4 Input and 2 Output.



    3. The version 8.5 Arms now has an available input.



    4. Possibility of installing a pressure sensor, auxiliary. For example, it can be installed after a filter (e.g. water softener) or a boiler to compensate for their losses.



    NEW CONSTRUCTION OF THE NON-RETURN VALVE


    Dettaglio valvola di non ritorno dell'Active Driver Plus

    Valvola di non ritorno dell'Active Driver Plus
    • Seals on the sleeve ensuring greater tightness and minimum flow the lowest.

    • Solves the problem of leakage continues.

    • Max flow rate 300 l/min guaranteed load losses to 9 metres instead of 15.

    • Special screws of fastening from the outside (any leakage will not damage the card).

    • The screws used are torx with pin anti-theft, with head gasket.

    • Easily maintained thanks to the possibility of replacing the or.

    • The material NORYL.