PWM II 230 D / 10.5 - 10.5 A single-phase / three-phase inverter

88002045

New product

Inverter for 230 V three-phase pumps up to 3 HP with single-phase power supply

More details

  • 230 V

Acquistando questo prodotto puoi ricevere fino a 556 punti . Il totale del tuo carrello è 556 punti può essere convertito in un voucher di: 5,56 € .


Our services

Telephone assistance for information before purchase.

After-sales assistance to the installation of the product.

 Calculate Shipping Cost
Shipping:
9,86 €
to Italia via Corriere DHL - Tariffa EXPRESS DOMESTIC
Estimated delivery: No estimated delivery specified

556,99 € tax incl.

Make a purchase proposal

La tua proposta è stata inviata.


  • Inteso come il prezzo offerto per singolo prodotto
  •     *Campi richiesti

Caricamento

Voti e valutazione clienti

(5/5)
1 voto(i) - 1 recensione cliente
Vedere le distribuzione

More info

The PWM II 230 D / 10.5 is an integrated system for the variable speed control (INVERTER) of electric pumps, capable of keeping the pressure constant as the flow rate varies.

Through the different possible settings and the availability of configurable input and output contacts, it is possible to adapt the operation of the PWM system to the needs of various systems.

The PWM II 230 D / 10.5 model drives electric pumps with standard three-phase asynchronous motors while being powered by a single-phase line. The power supply voltage of the installed electric pump motor must be 230V 50Hz three-phase. The utility connected to PWM 230 must not exceed 10.5 Arms as phase current.

Features Active Driver

Scheda inverter

Inverter

The Active Drivers Plus does absorb at the pump, the minimum power required to meet the water demand, thereby avoiding unnecessary wastes and allowing considerable energy savings.

Display inverter

Display

Oled Display for high readability. The intuitive interface allows you to access all the information and customise the main settings according to the the specification.

Aumento della vita della pompa.

Increase the life of the pump.

Thanks to the technology inverter, which reduces the speed of the motor, it has considerable increase of the life of the pump.

Predisposizione per il funzionamento nei gruppi

Predisposition to the operation in groups

The Active Driver Plus is intended for operation in the groups of pressurization. Each pump needs an Active Driver Plus the controls in order to minimize the consumption of electrical power.

Sensori di flusso e di pressione

Sensors of pressure and flow

Transducer electronic pressure and flow sensor integrated. The Active Driver Plus does not require external sensors.

Valvola di non ritorno

Non-return valve

Easily removable for maintenance.

THE MAIN DIFFERENCES WITH THE PREVIOUS MODEL

THE PREVIOUS MODEL


Modello precedente

NEW MODEL PLUS


Nuovo modello Plus

Reliable

The experience of DAB in mechatronics has been condensed in this product that has been made extremely reliable, handsome and versatile.

Easy to install

The experience of DAB in mechatronics has been condensed in this product that has been made extremely reliable, handsome and versatile.

Easy to set up

The inverter, using the wizard, it is easily readable on the display, guide the installer to the inclusion of all the necessary parameters and helps in some cases, the definition of the setting is appropriate.

Trasparenza e valvola di non ritorno dell'Active Driver Plus

NEW INTERFACE DISPLY AND SOFTWARE

Software

Same functionality as the previous version.

Connectivity with other equipment on all models up to 8 pumps.

Backward compatibility of software that is able to upgrade its previous versions.

OLED Display

Installation wizard and simplified by using the Wizard.

Improved the usability of the information thanks to the graphic display.

Better visibility for resolution and high contrast.

Graphical explanation and description of the parameter.

Possibility to choose the language of the menu.

Interface

New button 'ENABLE' to shut down/restart the machine.

Interfaccia Active Driver Plus

NEW CONSTRUCTION OF THE COVER

Coperchio Active Driver Plus
  1. Cable glands trade replaced the old cable glands moulded providing greater protection.

  2. Added, at the bottom, 3 holes closed for inputs/outputs with screw cap M16.

  3. The external screws of the clamping of the cover, and the area of the seal increase the sealing reliability of the cover.

Seat OR of the cover with better compression and seal.

Tenuta ACTIVE DRIVER Plus

NEW CONSTRUCTION OF THE BODY

Tappo di scarico dell'Active Driver Plus

Drain plug and 3/8 "in plastic instead of 1/4" brass hex.

Sede del sensore dell'Active Driver Plus

The seat of the pressure sensor is extremely robust.

NEW CONSTRUCTION OF THE SINK

  1. Improved cooling of the inverter through the increased opening for the passage of water on the sink.



  2. Two models: one for 230 and a 1-Basic and one for 400 and great, and the internal pocket to help the dissipation.



  3. Coupling screws to the card more accessible: allow you to remove the card while maintaining the system under pressure.



  4. Material CW617N instead of CW614N suitable for certification of drinking water in most states.



Dissipatore dell'Active Driver Plus

NEW CONSTRUCTION OF THE ELECTRONIC CARD

Scheda elettronica dell'Active Driver Plus
  1. And increased reliability due to transformer Switching and non-linear, which has also permitted a reduction of the weight.



  2. The cards are unified, and all models have 4 Input and 2 Output.



  3. The version 8.5 Arms now has an available input.



  4. Possibility of installing a pressure sensor, auxiliary. For example, it can be installed after a filter (e.g. water softener) or a boiler to compensate for their losses.



NEW CONSTRUCTION OF THE NON-RETURN VALVE


Dettaglio valvola di non ritorno dell'Active Driver Plus

Valvola di non ritorno dell'Active Driver Plus
  • Seals on the sleeve ensuring greater tightness and minimum flow the lowest.

  • Solves the problem of leakage continues.

  • Max flow rate 300 l/min guaranteed load losses to 9 metres instead of 15.

  • Special screws of fastening from the outside (any leakage will not damage the card).

  • The screws used are torx with pin anti-theft, with head gasket.

  • Easily maintained thanks to the possibility of replacing the or.

  • The material NORYL.

Recensioni

Da Axilleas P. (LAGADAS, Grecia) il 06 Aug. 2019 (PWM II 230 D / 10.5 - 10.5 A single-phase / three-phase inverter) :
(5/5

Thank you

I am fully satisfated with the product and the client support. Thank you very much.

 Segnalare un abuso

Scheda tecnica

Power data
Power linesingle phase
Line voltage230 V
The current line22
Stages of line1 x 230 V
Output data
Motor powerThree phase
Motor voltage230 V
The motor phases3 x 230 V
Motor power (Kw)2.2 Kw
Safeties
MeterYes
Dry runningYes
A short-circuit between the phasesYes
Hydraulic features
Flow rate max. (l./min.)300
Construction features
The mouth of the Suction1 "1/4
Outlet1 "1/2
Degree of protectionIP 55
Dimensioni e peso
Width (cm)23.7
Height (cm)28.2
Depth (cm)18.4
Default
WarrantyTwo years

Prodotti correlati

Customers who bought this product also bought:

Download

Manual PWM 230-400

User manual with instructions for installation and use of inverters in series line PWM 230-400 of WaCs.

Download (697.38k)