MC 10/45 - electric Pumps for sewage with dual-CHANNEL three-phase
Flow rate up to 600 l/min (36 m3/h). Head up to 11 m. Motor 0.75 Kw (1 HP).
The pumps in the MC series are equipped with twin-CHANNEL that allows the drainage of liquids with the presence of suspended solids up to Ø 50 mm of short fibers.
Are constructed of cast iron of considerable thickness, exceptional strength, abrasion resistance and durability.
They are recommended for pumping waste water and sewage, waste waters, waters mixed with mud, groundwater and surface waters for uses such as: condominiums, industries, multi-storey car parks, underground car parks, washing areas, etc
The new version of the DC series completely designed and made even more reliable with the introduction of double mechanical seal and treatment in cataphoresis of all the cast iron parts.
- Motor connection
- THREE-PHASE
- Motor power (HP)
- 1
- Absorption at 230V (A)
- 3.6
- Absorption at 400V (A)
- 2.1
- Delivery port
- 2"
- Body Pump
- Cast iron
- Impeller
- AISI 304 stainless steel
- Number of impellers
- 1
- Motor shaft
- AISI 431 stainless steel
- Check valve
- no
- Degree of protection
- IP 68
- Flow rate min. (l./min.)
- 50
- Max flow (l./min.)
- 600
- Min head (m.)
- 2
- Max head (m.)
- 12
- Cable length (m)
- 10
- Employments
- drainage, drying up, slightly dirty waters
- Liquid temperature max. (° C)
- 40
- Height (cm)
- 41.3
- Weight kg)
- 17.9
- Guarantee
- Two years
|
|
|
|
|
|
|
|
|
|
|
|
Bearings
Pump side motor bearing | 6203 ZZ |
Opposite side engine bearing | 6203 ZZ |
Tree holding
Type of seal | Double mechanical seal in oil chamber |
Engine side model | MG1-14D SIC |
LM diameter | 14 |
LM fixed ring | Silicon carbide |
LM rotating ring | Graphite |
LM elastomer | NBR |
LP diameter | 14 |
LP fixed ring | Silicon carbide |
LP rotating ring | Silicon carbide |
LP elastomer | NBR |
Materials
1.0 - Pump body | Cast iron GJL 200 EN 1561 |
1.4 - Basic | Stainless steel EN 1.4301 (AISI 304) |
3.0 - Impeller | Stainless steel EN 1.4301 (AISI 304) |
4.0 - Pump shaft | Stainless steel EN 1.4057 (AISI 431) |
6.0 - Motor holder | Cast iron GJL 200 EN 1561 |
6.1 - Engine cover | Reinforced technopolymer |
7.0 - Lantern | Stainless steel EN 1.4301 (AISI 304) |
Compare with Similar Products
MC 10/45 - electric Pumps for sewage with dual-CHANNEL three-phaseThis product Flow rate up to 600 l/min (36 m3/h). Head up to 11 m. Motor 0.75 Kw (1 HP). | MC 15/45 - electric Pumps for sewage with dual-CHANNEL three-phaseFlow rates up to 750 l/min (45 m3/h). Head up to 14 m. Motor 1.1 Kw (1.5 HP). | MC 15/50 Pumps for sewage water TWO-phaseFlow rate up to 800 l/min (48 m3/h). Head up to 14 m. Motor 1.1 Kw (1.5 HP). | MC 20/50 - electric Pumps for sewage with dual-CHANNEL three-phaseFlow rate up to 900 l/min (54 m3/h). Head up to 16 m. Motor 1.5 Kw (2 HP). | |
---|---|---|---|---|
Motor connection | Motor connection THREE-PHASE | Motor connection THREE-PHASE | Motor connection THREE-PHASE | Motor connection THREE-PHASE |
Motor power (HP) | Motor power (HP) 1 | Motor power (HP) 1.5 | Motor power (HP) 1.5 | Motor power (HP) 2 |
Absorption at 230V (A) | Absorption at 230V (A) 3.6 | Absorption at 230V (A) 5.5 | Absorption at 230V (A) -- | Absorption at 230V (A) -- |
Absorption at 400V (A) | Absorption at 400V (A) 2.1 | Absorption at 400V (A) 3.2 | Absorption at 400V (A) 3.5 | Absorption at 400V (A) 4.3 |
Delivery port | Delivery port 2" | Delivery port 2" | Delivery port 2 "1/2 | Delivery port 2 "1/2 |
Body Pump | Body Pump Cast iron | Body Pump Cast iron | Body Pump Cast iron | Body Pump Cast iron |
Impeller | Impeller AISI 304 stainless steel | Impeller AISI 304 stainless steel | Impeller AISI 304 stainless steel | Impeller AISI 304 stainless steel |
Number of impellers | Number of impellers 1 | Number of impellers 1 | Number of impellers 1 | Number of impellers 1 |
Motor shaft | Motor shaft AISI 431 stainless steel | Motor shaft AISI 431 stainless steel | Motor shaft AISI 431 stainless steel | Motor shaft AISI 431 stainless steel |
Check valve | Check valve no | Check valve no | Check valve no | Check valve no |
Degree of protection | Degree of protection IP 68 | Degree of protection IP 68 | Degree of protection IP 68 | Degree of protection IP 68 |
Flow rate min. (l./min.) | Flow rate min. (l./min.) 50 | Flow rate min. (l./min.) 50 | Flow rate min. (l./min.) 100 | Flow rate min. (l./min.) 100 |
Max flow (l./min.) | Max flow (l./min.) 600 | Max flow (l./min.) 750 | Max flow (l./min.) 800 | Max flow (l./min.) 900 |
Min head (m.) | Min head (m.) 2 | Min head (m.) 2 | Min head (m.) 1 | Min head (m.) 1 |
Max head (m.) | Max head (m.) 12 | Max head (m.) 15 | Max head (m.) 16 | Max head (m.) 18 |
Cable length (m) | Cable length (m) 10 | Cable length (m) 10 | Cable length (m) 10 | Cable length (m) 10 |
Employments | Employments drainage, drying up, slightly dirty waters | Employments drainage, drying up, slightly dirty waters | Employments drainage, drying up, slightly dirty waters | Employments drainage, drying up, slightly dirty waters |
Liquid temperature max. (° C) | Liquid temperature max. (° C) 40 | Liquid temperature max. (° C) 40 | Liquid temperature max. (° C) 40 | Liquid temperature max. (° C) 40 |
Height (cm) | Height (cm) 41.3 | Height (cm) 42.8 | Height (cm) 52.4 | Height (cm) 52.4 |
Weight kg) | Weight kg) 17.9 | Weight kg) 19.2 | Weight kg) 35.4 | Weight kg) 36.4 |
Guarantee | Guarantee Two years | Guarantee Two years | Guarantee Two years | Guarantee Two years |