O-T-5-QP - Fixed angle nozzle 1.5 m 90 degrees range
Male attachment. Precision Spray Series.
Toro's OT-5-QP Precision Series Tip features H²O chip technology that provides higher efficiency than standard tip installations.
By lowering the precipitation rate to 2.5 centimeters per hour or less, these nozzles are designed to conserve water and reduce losses.
Greater arc selection for precise deployment.
Uses 1/3 less flow to reach the radius of a typical sprayer nozzle.
The fixed or ultrasonically welded parts ensure no variation in the water throw, to guarantee a better margin of definition.
The H²O chip generates a larger and more uniform droplet size which creates compactness in the irrigated arc.
- Max range (m)
- 1.5
- Working angle
- fixed
- Angolo di lavoro
- 90
- Type of attack
- male
Patented H²0 Chip Technology
With the patented H²0 technology - with no moving parts - each series of Precision series nozzles creates one or more oscillating high frequency flows to reach the desired radius and arc, reducing the water used by 1/3.
Maximize sprinkler efficiency
Precision nozzles provide an industry-first precipitation rate (25mm / h) to optimize soil penetration rate. The lower precipitation rate, combined with the high distribution uniformity, make this series of distributors the most efficient in the 1.5-4.6 m category.
Design and effectiveness for renovation purposes
The flow volume reduction of the Precision Series nozzles optimize design efficiency and help reduce overall material costs by using fewer valves and controller stations. Additionally, existing low pressure systems can be repaired with a simple refurbishment of the existing high flow nozzle.
Third party validation of performance
Precision Series nozzles have been tested and validated in the field and at the Center for Irrigation Technology (CIT).
Optional pressure compensation device (PCD)
It allows optimal performance even when the inlet pressure reaches or exceeds 2.75 bar.