chevron_left chevron_right
RX 4/40 - electric Pump for dirty water VORTEX three phase
Flow rate up to 280 l/min (16.8 m3/h). Head up to 9.5 m. Motor 0.75 Kw (1 HP).
WITHOUT THE FLOAT
There are no reviews yet
Telephone support for information before purchasing.
Reinforced packaging to reduce transport damage.
After-sales assistance for product installation.
Description
The pumps RX-VORTEX are suitable for drainage of dirty water.
The constructive solutions to guarantee safety of operation even in the case of continuous use, thanks to the total cooling of the engine.
They are recommended for domestic use, for draining dirty water that may contain solids in suspension.
Data sheet
- Motor connection
- THREE-PHASE
- Motor power (HP)
- 1
- Capacitor
- 20 µF450 VL
- Absorption at 400V (A)
- 2.1
- Delivery port
- 1 "1/2
- Body Pump
- AISI 304 stainless steel
- Impeller
- AISI 304 stainless steel
- Number of impellers
- 1
- Motor shaft
- AISI 431 stainless steel
- Check valve
- no
- Degree of protection
- IP 68
- Flow rate min. (l./min.)
- 20
- Max flow (l./min.)
- 280
- Min head (m.)
- 2
- Max head (m.)
- 10
- Cable length (m)
- 10
- Employments
- drainage, drying up, slightly dirty waters
- Liquid temperature max. (° C)
- 40
- Height (cm)
- 43
- Width (cm)
- 22
- Weight kg)
- 12.2
- Guarantee
- Two years
RX - VORTEX models and performances
|
|
|
|
|
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Construction data of the RX 4/40 series
Bearings
| Pump side motor bearing | 6203 ZZ - C3E |
| Opposite side engine bearing | 6203 ZZ - C3E |
Tree holding
| Type of seal | Double mechanical seal in oil chamber |
| LM diameter | 14 |
| LM fixed ring | Silicon carbide |
| LM rotating ring | Graphite |
| LM elastomer | NBR |
| Shrinkage DN1=450 DN2=350 | MG1-14D SIC |
| LP diameter | 14 |
| LP fixed ring | Silicon carbide |
| LP rotating ring | Silicon carbide |
| LP elastomer | NBR |
Materials
| 1.0 - Pump body | Stainless steel EN 1.4301 (AISI 304) |
| 3.0 - Impeller | Stainless steel EN 1.4301 (AISI 304) |
| 4.0 - Pump shaft | Stainless steel EN 1.4057 (AISI 431) |
| 5.1 - Diffuser | Stainless steel EN 1.4301 (AISI 304) |
| 6.0 - Motor holder | Stainless steel EN 1.4301 (AISI 304) |
| 6.1 - Engine cover | Stainless steel EN 1.4301 (AISI 304) |
| 7.0 - Lantern | Stainless steel EN 1.4301 (AISI 304) |
| 8.0 - Suction Grid/Filter | Stainless steel EN 1.4301 (AISI 304) |
Compare with Similar Products
 RX 4/40 - electric Pump for dirty water VORTEX three phaseThis product Flow rate up to 280 l/min (16.8 m3/h). Head up to 9.5 m. Motor 0.75 Kw (1 HP). WITHOUT THE FLOAT |  RX 2/20 (10m) - electric Pump for dirty water VORTEX three phaseFlow rate up to 180 l/min (10.8 m3/h). Head up to 6.5 m. Motor 0.37 Kw (0.5 HP). 10 metres of cable. |  RX 3/20 (10m) - electric Pump for dirty water VORTEX three phaseFlow rate up to 180 l/min (10.8 m3/h). Head up to 8 m. Motor 0.55 Kw (0.75 HP). 10 metres of cable. |  RX 5/40 - electric Pump for dirty water VORTEX three phaseFlow rate up to 380 l/min (22.8 m3/h). Prevalence up to 12.5 m. Motor 1.1 Kw (1.5 HP). WITHOUT THE FLOAT | |
|---|---|---|---|---|
| Motor connection | Motor connection THREE-PHASE | Motor connection THREE-PHASE | Motor connection THREE-PHASE | Motor connection THREE-PHASE |
| Motor power (HP) | Motor power (HP) 1 | Motor power (HP) 0.50 | Motor power (HP) 0.75 | Motor power (HP) 1.5 |
| Capacitor | Capacitor 20 µF450 VL | Capacitor -- | Capacitor -- | Capacitor -- |
| Absorption at 400V (A) | Absorption at 400V (A) 2.1 | Absorption at 400V (A) 2.6 | Absorption at 400V (A) 1.5 | Absorption at 400V (A) 3.1 |
| Delivery port | Delivery port 1 "1/2 | Delivery port 1 "1/4 | Delivery port 1 "1/4 | Delivery port 1 "1/2 |
| Body Pump | Body Pump AISI 304 stainless steel | Body Pump AISI 304 stainless steel | Body Pump AISI 304 stainless steel | Body Pump AISI 304 stainless steel |
| Impeller | Impeller AISI 304 stainless steel | Impeller AISI 304 stainless steel | Impeller AISI 304 stainless steel | Impeller AISI 304 stainless steel |
| Number of impellers | Number of impellers 1 | Number of impellers 1 | Number of impellers 1 | Number of impellers 1 |
| Motor shaft | Motor shaft AISI 431 stainless steel | Motor shaft Stainless steel EN 10088-3 1.4104 | Motor shaft AISI 431 stainless steel | Motor shaft AISI 431 stainless steel |
| Check valve | Check valve no | Check valve no | Check valve no | Check valve no |
| Degree of protection | Degree of protection IP 68 | Degree of protection IP 68 | Degree of protection IP 68 | Degree of protection IP 68 |
| Flow rate min. (l./min.) | Flow rate min. (l./min.) 20 | Flow rate min. (l./min.) 20 | Flow rate min. (l./min.) 20 | Flow rate min. (l./min.) 20 |
| Max flow (l./min.) | Max flow (l./min.) 280 | Max flow (l./min.) 180 | Max flow (l./min.) 180 | Max flow (l./min.) 380 |
| Min head (m.) | Min head (m.) 2 | Min head (m.) 2 | Min head (m.) 3 | Min head (m.) 2 |
| Max head (m.) | Max head (m.) 10 | Max head (m.) 7 | Max head (m.) 9 | Max head (m.) 12.5 |
| Cable length (m) | Cable length (m) 10 | Cable length (m) 5 | Cable length (m) 5 | Cable length (m) 10 |
| Employments | Employments drainage, drying up, slightly dirty waters | Employments slightly dirty waters | Employments drainage, drying up, slightly dirty waters | Employments drainage, drying up, slightly dirty waters |
| Liquid temperature max. (° C) | Liquid temperature max. (° C) 40 | Liquid temperature max. (° C) 40 | Liquid temperature max. (° C) 40 | Liquid temperature max. (° C) 40 |
| Height (cm) | Height (cm) 43 | Height (cm) 29 | Height (cm) 32 | Height (cm) 43 |
| Width (cm) | Width (cm) 22 | Width (cm) 14.7 | Width (cm) 14.7 | Width (cm) 22 |
| Weight kg) | Weight kg) 12.2 | Weight kg) 6.1 | Weight kg) 7.9 | Weight kg) 13 |
| Guarantee | Guarantee Two years | Guarantee Two years | Guarantee Two years | Guarantee Two years |