JSWm 3BM - Single-phase self-priming electric pump
Flow rate up to 120 l/min (7.2 m³/h). Head up to 58 m. 1.5 kW (2 HP) engine.
The Pedrollo JSWm 3BM pump is recommended for pumping clean water and liquids that are chemically non-aggressive for the materials constituting the pump.
Due to its reliability and ease of use, it is recommended for domestic use, especially for water distribution in combination with small or medium-sized autoclave tanks, for watering vegetable patches and gardens.
The JSW self-priming pump is designed to suck water even in the presence of air mixed with the pumped liquid.
The installation must be carried out in closed places or in any case protected from the weather.
The JSWm 3BM pump has a head of up to 97 meters and a flow rate of up to 160 metres.
The pump is entirely made of cast iron, this guarantees good resistance and long life.
- Motor connection
- SINGLE PHASE
- Motor power (HP)
- 2
- Absorption at 230V (A)
- 9.7
- Capacitor
- 45 µF450 VL
- Suction mouth
- 1 "1/4
- Delivery port
- 1 "
- Body Pump
- Cast iron
- Impeller
- Brass
- Number of impellers
- 1
- Motor shaft
- Stainless steel EN 10088-3 1.4104
- Check valve
- no
- Degree of protection
- IP 44
- Flow rate min. (l./min.)
- 10
- Max flow (l./min.)
- 120
- Min head (m.)
- 30
- Max head (m.)
- 60
- Employments
- water supply, pressurization systems, irrigation, washing systems, transfer of tanks, fire prevention systems
- Liquid temperature max. (° C)
- 40
- Height (cm)
- 24.1
- Width (cm)
- 20.6
- Depth (cm)
- 52.2
- Weight kg)
- 26.5
- Guarantee
- Two years
|
|
|
|
|
Bearings
Pump side motor bearing | 6204 ZZ |
Opposite side engine bearing | 6204 ZZ |
Tree holding
Type of seal | Single Mechanical Seal |
Shrinkage DN1=450 DN2=350 | FN-18 |
LP diameter | 18 |
LP fixed ring | Graphite |
LP rotating ring | Ceramic |
LP elastomer | NBR |
Materials
1.0 - Pump body | Cast iron GJL 200 EN 1561 |
2.1 - Seal holder cover | Cast iron GJL 200 EN 1561 |
3.0 - Impeller | Stainless steel EN 1.4301 (AISI 304) |
3.1 - Ejector group | Reinforced technopolymer |
4.0 - Pump shaft | Stainless steel EN 1.4057 (AISI 431) |
6.0 - Motor holder | EN-AB 46100 aluminium |
7.0 - Lantern | EN-AB 46100 aluminium |
Compare with Similar Products
JSWm 3BM - Single-phase self-priming electric pumpThis product Flow rate up to 120 l/min (7.2 m³/h). Head up to 58 m. 1.5 kW (2 HP) engine. | JSWm 2B - Single-phase self-priming electric pumpFlow rate up to 70 l / min (4.2 m³ / h). Head up to 51 m. 0.90 Kw (1.25 HP) engine. | JSWm 3BH - Single-phase self-priming electric pumpFlow rate up to 80 l / min (4.8 m³ / h). Head up to 70 m. 1.5 Kw (2 HP) motor. | JSWm 3BL - Single-phase self-priming electric pumpFlow rate up to 160 l / min (9.6 m³ / h). Head up to 48 m. 1.5 Kw (2 HP) motor. | |
---|---|---|---|---|
Motor connection | Motor connection SINGLE PHASE | Motor connection SINGLE PHASE | Motor connection SINGLE PHASE | Motor connection SINGLE PHASE |
Motor power (HP) | Motor power (HP) 2 | Motor power (HP) 1.25 | Motor power (HP) 2 | Motor power (HP) 2 |
Absorption at 230V (A) | Absorption at 230V (A) 9.7 | Absorption at 230V (A) 5.8 | Absorption at 230V (A) 9.5 | Absorption at 230V (A) -- |
Capacitor | Capacitor 45 µF450 VL | Capacitor 20 µF450 VL | Capacitor 31.5 µF450 VL | Capacitor -- |
Suction mouth | Suction mouth 1 "1/4 | Suction mouth 1 " | Suction mouth 1 "1/4 | Suction mouth -- |
Delivery port | Delivery port 1 " | Delivery port 1 " | Delivery port 1 " | Delivery port -- |
Body Pump | Body Pump Cast iron | Body Pump Cast iron | Body Pump Cast iron | Body Pump -- |
Impeller | Impeller Brass | Impeller AISI 304 stainless steel | Impeller Brass | Impeller -- |
Number of impellers | Number of impellers 1 | Number of impellers 1 | Number of impellers 1 | Number of impellers -- |
Motor shaft | Motor shaft Stainless steel EN 10088-3 1.4104 | Motor shaft Stainless steel EN 10088-3 1.4104 | Motor shaft Stainless steel EN 10088-3 1.4104 | Motor shaft -- |
Check valve | Check valve no | Check valve no | Check valve no | Check valve -- |
Degree of protection | Degree of protection IP 44 | Degree of protection IP 44 | Degree of protection IP 44 | Degree of protection -- |
Flow rate min. (l./min.) | Flow rate min. (l./min.) 10 | Flow rate min. (l./min.) 5 | Flow rate min. (l./min.) 10 | Flow rate min. (l./min.) -- |
Max flow (l./min.) | Max flow (l./min.) 120 | Max flow (l./min.) 70 | Max flow (l./min.) 80 | Max flow (l./min.) 160 |
Min head (m.) | Min head (m.) 30 | Min head (m.) 24 | Min head (m.) 39 | Min head (m.) -- |
Max head (m.) | Max head (m.) 60 | Max head (m.) 54 | Max head (m.) 76 | Max head (m.) 48 |
Employments | Employments water supply, pressurization systems, irrigation, washing systems, transfer of tanks, fire prevention systems | Employments transfer of tanks, fire prevention systems, water supply, pressurization systems, irrigation, washing systems | Employments transfer of tanks, fire prevention systems, water supply, pressurization systems, irrigation, washing systems | Employments -- |
Liquid temperature max. (° C) | Liquid temperature max. (° C) 40 | Liquid temperature max. (° C) 40 | Liquid temperature max. (° C) 40 | Liquid temperature max. (° C) +40°C |
Height (cm) | Height (cm) 24.1 | Height (cm) 20.1 | Height (cm) 24.1 | Height (cm) -- |
Width (cm) | Width (cm) 20.6 | Width (cm) 18 | Width (cm) 20.6 | Width (cm) -- |
Depth (cm) | Depth (cm) 52.2 | Depth (cm) 38.8 | Depth (cm) 52.2 | Depth (cm) -- |
Weight kg) | Weight kg) 26.5 | Weight kg) 14 | Weight kg) 26.5 | Weight kg) 26.5 |
Guarantee | Guarantee Two years | Guarantee Two years | Guarantee Two years | Guarantee -- |