BCm 15/50-ST - electric Pump, sewage non-clog type single-phase Pedrollo - 1
zoom_out_map
chevron_left chevron_right

BCm 15/50-ST - electric Pump, sewage non-clog type single-phase

Flow rates up to 750 l/min (45 m3/h). Head up to 14 m. Motor 1.1 Kw (1.5 HP).

€688.08

€564.00 Tax excluded

Close
(4/5) out of 1 total ratings
Read the reviews
Make a purchase proposal

Your Offer is sent.

Your Offer is accepted, please check your inbox.

BCm 15/50-ST - electric Pump, sewage non-clog type single-phase
  • Use dot instead of comma

Loading

Telephone support for information before purchasing.
Reinforced packaging to reduce transport damage.
After-sales assistance for product installation.
Description

The submersible pumps BC-MF are recommended for draining dirty water and sewage in the areas of domestic and civil.

Are equipped with twin-CHANNEL that allows the pumping of liquids with suspended solids up to Ø 50 mm of short fibers.

Are suitable for the conveyance of waste water and sewage, waste water, surface water, water mixed with mud in uses such as: holiday homes, villas, single-family houses.

These pumps distinguish themselves for their reliability, in particular in fixed installations with automatic operation.

Data sheet
Pedrollo
BCm 15/50-ST
9 Items
Motor connection
SINGLE PHASE
Motor power (HP)
1.5
Absorption at 230V (A)
8.2
Capacitor
25 µF450 VL
Delivery port
2"
Body Pump
AISI 304 stainless steel
Impeller
AISI 304 stainless steel
Number of impellers
1
Motor shaft
AISI 431 stainless steel
Check valve
no
Degree of protection
IP 68
Flow rate min. (l./min.)
50
Max flow (l./min.)
750
Min head (m.)
2
Max head (m.)
15
Cable length (m)
10
Employments
drainage, drying up, slightly dirty waters
Liquid temperature max. (° C)
40
Height (cm)
44.6
Weight kg)
16.5
Guarantee
Two years
Attachments

BC data sheet

Construction and operating characteristics. Working curves, limits of use and dimensions of BC Pedrollo pumps.

file_download Download (651.59KB)

Buy it with

  • BCm 15/50-ST - electric Pump, sewage non-clog type single-phase
  • +
  • BCm 15/50 - electric Pump CHANNEL for sewage water single-phase
  • +
  • EASYPRESS-BLU - Electronic pressure regulator with manometer
  • €1,437.16-10 %
    Total price: €1,293.44
BCm-ST models and performances
GUY
single phase
BCm - 10/50-ST
BCm - 15/50-ST
POWER
KWHP
0.751
1.11.5
Construction data of the BC 15/50-ST
Cutaway BC-ST pumps
Bearings
Pump side motor bearing6203 2RS - C3
Opposite side engine bearing6203 ZZ
Tree holding
Type of sealDouble mechanical seal in oil chamber
Engine side modelMG1-14D SIC
LM diameter14
LM fixed ringSilicon carbide
LM rotating ringGraphite
LM elastomerNBR
Shrinkage DN1=450 DN2=350MG1-14D SIC
LP diameter14
LP fixed ringSilicon carbide
LP rotating ringSilicon carbide
LP elastomerNBR
Materials
1.0 - Pump bodyStainless steel EN 1.4301 (AISI 304)
1.4 - BasicStainless steel EN 1.4301 (AISI 304)
3.0 - ImpellerStainless steel EN 1.4301 (AISI 304)
4.0 - Pump shaftStainless steel EN 1.4057 (AISI 431)
6.0 - Motor holderStainless steel EN 1.4301 (AISI 304)
6.1 - Engine coverStainless steel EN 1.4301 (AISI 304)
7.0 - LanternCast iron GJL 200 EN 1561

Compare with Similar Products

BCm 15/50-ST - electric Pump, sewage non-clog type single-phase Pedrollo - 1

BCm 15/50-ST - electric Pump, sewage non-clog type single-phase

This product

Flow rates up to 750 l/min (45 m3/h). Head up to 14 m. Motor 1.1 Kw (1.5 HP).

BCm 10/50-ST - electric Pump, sewage non-clog type single-phase Pedrollo - 1

BCm 10/50-ST - electric Pump, sewage non-clog type single-phase

Quick View

Flow rate up to 600 l/min (36 m3/h). Head up to 11 m. Motor 0.75 Kw (1 HP).

Motor connection Motor connection SINGLE PHASE Motor connection SINGLE PHASE
Motor power (HP) Motor power (HP) 1.5 Motor power (HP) 1
Absorption at 230V (A) Absorption at 230V (A) 8.2 Absorption at 230V (A) 5
Capacitor Capacitor 25 µF450 VL Capacitor 20 µF450 VL
Delivery port Delivery port 2" Delivery port 2"
Body Pump Body Pump AISI 304 stainless steel Body Pump AISI 304 stainless steel
Impeller Impeller AISI 304 stainless steel Impeller AISI 304 stainless steel
Number of impellers Number of impellers 1 Number of impellers 1
Motor shaft Motor shaft AISI 431 stainless steel Motor shaft AISI 431 stainless steel
Check valve Check valve no Check valve no
Degree of protection Degree of protection IP 68 Degree of protection IP 68
Flow rate min. (l./min.) Flow rate min. (l./min.) 50 Flow rate min. (l./min.) 50
Max flow (l./min.) Max flow (l./min.) 750 Max flow (l./min.) 600
Min head (m.) Min head (m.) 2 Min head (m.) 2
Max head (m.) Max head (m.) 15 Max head (m.) 12
Cable length (m) Cable length (m) 10 Cable length (m) 5
Employments Employments drainage, drying up, slightly dirty waters Employments drainage, drying up, slightly dirty waters
Liquid temperature max. (° C) Liquid temperature max. (° C) 40 Liquid temperature max. (° C) 40
Height (cm) Height (cm) 44.6 Height (cm) 43.1
Weight kg) Weight kg) 16.5 Weight kg) 14.9
Guarantee Guarantee Two years Guarantee Two years