TOP 3 - VORTEX (10m) - electric Pump to drain dirty water
Flow rate up to 180 l/min (10.8 m3/h). Head up to 8 m. Motor 0.55 Kw (0.75 HP). 10 m cable with shuko plug.
The pump TOP VORTEX is suitable for drainage of dirty water, chemically non aggressive to the materials making up the pump.
The constructive solutions used ensure ease of use and safe operation thanks to the total cooling of the engine and the double seal on the shaft.
It is recommended for use in the home, for the evacuation of dirty water, emptying tanks, domestic sewage, emptying of pits even in the presence of suspended solids up to Ø 20 mm.
- Motor connection
- SINGLE PHASE
- Motor power (HP)
- 0.75
- Absorption at 230V (A)
- 2.9
- Capacitor
- 14 µF450 VL
- Delivery port
- 1 "1/4
- Body Pump
- Technopolymer
- Impeller
- Technopolymer
- Number of impellers
- 1
- Motor shaft
- AISI 431 stainless steel
- Check valve
- no
- Degree of protection
- IP 68
- Flow rate min. (l./min.)
- 20
- Max flow (l./min.)
- 180
- Min head (m.)
- 1.5
- Max head (m.)
- 7
- Cable length (m)
- 10
- Employments
- drainage, drying up, slightly dirty waters
- Liquid temperature max. (° C)
- 40
- Height (cm)
- 8.31
- Width (cm)
- 15.2
- Weight kg)
- 6.6
- Guarantee
- Two years
|
|
|
|
|
|
|
Bearings
Pump side motor bearing | 6201 ZZ |
Opposite side engine bearing | 6201 ZZ |
Tree holding
Type of seal | Double Seal: Mechanical and Lip with oil chamber |
Engine side model | Lip seal |
LM diameter | 12 |
LM elastomer | NBR |
Shrinkage DN1=450 DN2=350 | STA-12R |
LP diameter | 12 |
LP fixed ring | Ceramic |
LP rotating ring | Graphite |
LP elastomer | NBR |
Materials
1.0 - Pump body | Reinforced technopolymer |
2.2 - Suction cover | Reinforced technopolymer |
3.0 - Impeller | Reinforced technopolymer |
4.0 - Pump shaft | Stainless steel EN 1.4057 (AISI 431) |
5.1 - Diffuser | Reinforced technopolymer |
6.0 - Motor holder | Stainless steel EN 1.4301 (AISI 304) |
6.1 - Engine cover | Stainless steel EN 1.4301 (AISI 304) |
8.0 - Suction Grid/Filter | Reinforced technopolymer |
Compare with Similar Products
TOP 3 - VORTEX (10m) - electric Pump to drain dirty waterThis product Flow rate up to 180 l/min (10.8 m3/h). Head up to 8 m. Motor 0.55 Kw (0.75 HP). 10 m cable with shuko plug. | TOP 3 (10m) - electric Pump to drain clear waterFlow rate up to 260 l/min (15.6 m3/h). Head up to 10.5 m. Motor 0.55 Kw (0.75 HP). 10 m cable with shuko plug. | TOP 3 - THE - motor-Pump drain for corrosive liquidsFlow rate up to 260 l/min (15.6 m3/h). Head up to 10.5 m. Motor 0.55 Kw (0.75 HP). 10 m cable with shuko plug. | TOP 2 - VORTEX (10m) - electric Pump to drain dirty waterFlow rate up to 180 l/min (10.8 m3/h). Head up to 7 m. Motor 0.37 Kw (0.5 HP). 10 m cable with shuko plug. | |
---|---|---|---|---|
Motor connection | Motor connection SINGLE PHASE | Motor connection SINGLE PHASE | Motor connection SINGLE PHASE | Motor connection SINGLE PHASE |
Motor power (HP) | Motor power (HP) 0.75 | Motor power (HP) 0.75 | Motor power (HP) 0.75 | Motor power (HP) 0.50 |
Absorption at 230V (A) | Absorption at 230V (A) 2.9 | Absorption at 230V (A) 3.2 | Absorption at 230V (A) 3.2 | Absorption at 230V (A) 2 |
Capacitor | Capacitor 14 µF450 VL | Capacitor 14 µF450 VL | Capacitor 14 µF450 VL | Capacitor 10 µF450 VL |
Delivery port | Delivery port 1 "1/4 | Delivery port 1 "1/4 | Delivery port 1 "1/4 | Delivery port 1 "1/4 |
Body Pump | Body Pump Technopolymer | Body Pump Technopolymer | Body Pump Technopolymer | Body Pump Technopolymer |
Impeller | Impeller Technopolymer | Impeller Noryl | Impeller Noryl | Impeller Technopolymer |
Number of impellers | Number of impellers 1 | Number of impellers 1 | Number of impellers 1 | Number of impellers 1 |
Motor shaft | Motor shaft AISI 431 stainless steel | Motor shaft AISI 431 stainless steel | Motor shaft Stainless steel EN 10088-3 1.4104 | Motor shaft AISI 431 stainless steel |
Check valve | Check valve no | Check valve no | Check valve Yes | Check valve no |
Degree of protection | Degree of protection IP 68 | Degree of protection IP 68 | Degree of protection IP 68 | Degree of protection IP 68 |
Flow rate min. (l./min.) | Flow rate min. (l./min.) 20 | Flow rate min. (l./min.) 20 | Flow rate min. (l./min.) 20 | Flow rate min. (l./min.) 20 |
Max flow (l./min.) | Max flow (l./min.) 180 | Max flow (l./min.) 260 | Max flow (l./min.) 260 | Max flow (l./min.) 180 |
Min head (m.) | Min head (m.) 1.5 | Min head (m.) 2 | Min head (m.) 2 | Min head (m.) 1.5 |
Max head (m.) | Max head (m.) 7 | Max head (m.) 10.5 | Max head (m.) 10 | Max head (m.) 7 |
Cable length (m) | Cable length (m) 10 | Cable length (m) 10 | Cable length (m) 5 | Cable length (m) 10 |
Employments | Employments drainage, drying up, slightly dirty waters | Employments drainage, drying up | Employments -- | Employments drainage, drying up, slightly dirty waters |
Liquid temperature max. (° C) | Liquid temperature max. (° C) 40 | Liquid temperature max. (° C) 40 | Liquid temperature max. (° C) +40°C | Liquid temperature max. (° C) 40 |
Height (cm) | Height (cm) 8.31 | Height (cm) 28.7 | Height (cm) 28.7 | Height (cm) 28.8 |
Width (cm) | Width (cm) 15.2 | Width (cm) 15.2 | Width (cm) 15.2 | Width (cm) 15.2 |
Weight kg) | Weight kg) 6.6 | Weight kg) 6.6 | Weight kg) 6.6 | Weight kg) 5.2 |
Guarantee | Guarantee Two years | Guarantee Two years | Guarantee Two years | Guarantee Two years |