TOP 3 - THE - motor-Pump drain for corrosive liquids
Flow rate up to 260 l/min (15.6 m3/h). Head up to 10.5 m. Motor 0.55 Kw (0.75 HP). 10 m cable with shuko plug.
The TOP series is suitable for the drainage of aggressive liquids.
The constructive solutions used ensure ease of use and safe operation thanks to the total cooling of the engine and the double seal on the shaft.
- Motor connection
- SINGLE PHASE
- Motor power (HP)
- 0.75
- Absorption at 230V (A)
- 3.2
- Capacitor
- 14 µF450 VL
- Delivery port
- 1 "1/4
- Body Pump
- Technopolymer
- Impeller
- Noryl
- Number of impellers
- 1
- Motor shaft
- Stainless steel EN 10088-3 1.4104
- Check valve
- Yes
- Degree of protection
- IP 68
- Flow rate min. (l./min.)
- 20
- Max flow (l./min.)
- 260
- Min head (m.)
- 2
- Max head (m.)
- 10
- Cable length (m)
- 5
- Liquid temperature max. (° C)
- +40°C
- Height (cm)
- 28.7
- Width (cm)
- 15.2
- Weight kg)
- 6.6
- Guarantee
- Two years
Bearings
Pump side motor bearing | 6201 ZZ |
Opposite side engine bearing | 6201 ZZ |
Tree holding
Type of seal | Double Seal: Mechanical and Lip with oil chamber |
Engine side model | Lip seal |
LM diameter | 12 |
LM elastomer | NBR |
Shrinkage DN1=450 DN2=350 | STA-12R |
LP diameter | 12 |
LP fixed ring | Ceramic |
LP rotating ring | Graphite |
LP elastomer | NBR |
Materials
1.0 - Pump body | Reinforced technopolymer |
2.2 - Suction cover | Stainless steel EN 1.4301 (AISI 304) |
3.0 - Impeller | Reinforced technopolymer |
4.0 - Pump shaft | Stainless steel EN 1.4057 (AISI 431) |
5.1 - Diffuser | Reinforced technopolymer |
6.0 - Motor holder | Stainless steel EN 1.4301 (AISI 304) |
6.1 - Engine cover | Stainless steel EN 1.4301 (AISI 304) |
8.0 - Suction Grid/Filter | Reinforced technopolymer |
Compare with Similar Products
TOP 3 - THE - motor-Pump drain for corrosive liquidsThis product Flow rate up to 260 l/min (15.6 m3/h). Head up to 10.5 m. Motor 0.55 Kw (0.75 HP). 10 m cable with shuko plug. | TOP 3 (10m) - electric Pump to drain clear waterFlow rate up to 260 l/min (15.6 m3/h). Head up to 10.5 m. Motor 0.55 Kw (0.75 HP). 10 m cable with shuko plug. | TOP 3 - GM (10m) - electric Pump to drain clear waterFlow rate up to 260 l/min (15.6 m3/h). Head up to 10.5 m. Motor 0.55 Kw (0.75 HP). 10 m cable with shuko plug. WITH MAGNETIC FLOAT. | 3 TOP - VORTEX/GM (10m) - electric Pump to drain dirty waterFlow rate up to 180 l/min (10.8 m3/h). Head up to 8 m. Motor 0.55 Kw (0.75 HP). 10 m cable with shuko plug. WITH MAGNETIC FLOAT. | |
---|---|---|---|---|
Motor connection | Motor connection SINGLE PHASE | Motor connection SINGLE PHASE | Motor connection SINGLE PHASE | Motor connection SINGLE PHASE |
Motor power (HP) | Motor power (HP) 0.75 | Motor power (HP) 0.75 | Motor power (HP) 0.75 | Motor power (HP) 0.75 |
Absorption at 230V (A) | Absorption at 230V (A) 3.2 | Absorption at 230V (A) 3.2 | Absorption at 230V (A) 3.2 | Absorption at 230V (A) 2.9 |
Capacitor | Capacitor 14 µF450 VL | Capacitor 14 µF450 VL | Capacitor 14 µF450 VL | Capacitor 14 µF450 VL |
Delivery port | Delivery port 1 "1/4 | Delivery port 1 "1/4 | Delivery port 1 "1/4 | Delivery port 1 "1/4 |
Body Pump | Body Pump Technopolymer | Body Pump Technopolymer | Body Pump Technopolymer | Body Pump Technopolymer |
Impeller | Impeller Noryl | Impeller Noryl | Impeller Noryl | Impeller Technopolymer |
Number of impellers | Number of impellers 1 | Number of impellers 1 | Number of impellers 1 | Number of impellers 1 |
Motor shaft | Motor shaft Stainless steel EN 10088-3 1.4104 | Motor shaft AISI 431 stainless steel | Motor shaft AISI 431 stainless steel | Motor shaft Stainless steel EN 10088-3 1.4104 |
Check valve | Check valve Yes | Check valve no | Check valve Yes | Check valve no |
Degree of protection | Degree of protection IP 68 | Degree of protection IP 68 | Degree of protection IP 68 | Degree of protection IP 68 |
Flow rate min. (l./min.) | Flow rate min. (l./min.) 20 | Flow rate min. (l./min.) 20 | Flow rate min. (l./min.) 20 | Flow rate min. (l./min.) 20 |
Max flow (l./min.) | Max flow (l./min.) 260 | Max flow (l./min.) 260 | Max flow (l./min.) 260 | Max flow (l./min.) 180 |
Min head (m.) | Min head (m.) 2 | Min head (m.) 2 | Min head (m.) 2 | Min head (m.) 1.5 |
Max head (m.) | Max head (m.) 10 | Max head (m.) 10.5 | Max head (m.) 10.5 | Max head (m.) 7 |
Cable length (m) | Cable length (m) 5 | Cable length (m) 10 | Cable length (m) 10 | Cable length (m) 10 |
Employments | Employments -- | Employments drainage, drying up | Employments drainage, drying up | Employments drainage, drying up |
Liquid temperature max. (° C) | Liquid temperature max. (° C) +40°C | Liquid temperature max. (° C) 40 | Liquid temperature max. (° C) 40 | Liquid temperature max. (° C) 40 |
Height (cm) | Height (cm) 28.7 | Height (cm) 28.7 | Height (cm) 28.7 | Height (cm) 20 |
Width (cm) | Width (cm) 15.2 | Width (cm) 15.2 | Width (cm) 20 | Width (cm) 15.2 |
Weight kg) | Weight kg) 6.6 | Weight kg) 6.6 | Weight kg) 6.7 | Weight kg) 6.7 |
Guarantee | Guarantee Two years | Guarantee Two years | Guarantee Two years | Guarantee Two years |