chevron_left chevron_right
VXm 10/50-N (10m) - electric Pump, VORTEX for sewage water single-phase
Flow rate up to 550 l/min (33 m3/h). Head up to 9 m. Motor 0.75 Kw (1 HP). 10 m cable with shuko plug.
There are no reviews yet
Telephone support for information before purchasing.
After-sales assistance for product installation.
Description
It is recommended for use in domestic, civil and industrial, in all cases where waters are present solids in suspension, up to a size of Ø 40 mm, for example, groundwater, surface water, sewage, and charges.
The use is recommended for the drainage of flooded basements and garages, such as basements, underground car parks, areas of washing machines, for domestic sewage, emptying cesspits disposal of sewage.
This pump stands for reliability, in particular in fixed installations with automatic operation.
Data sheet
- Motor connection
- SINGLE PHASE
- Motor power (HP)
- 1
- Absorption at 230V (A)
- 5.0
- Capacitor
- 20 µF450 VL
- Delivery port
- 2"
- Body Pump
- Cast iron and AISI 304 stainless steel
- Impeller
- AISI 304 stainless steel
- Number of impellers
- 1
- Motor shaft
- AISI 431 stainless steel
- Check valve
- no
- Degree of protection
- IP 68
- Flow rate min. (l./min.)
- 50
- Max flow (l./min.)
- 550
- Min head (m.)
- 1.5
- Max head (m.)
- 9
- Cable length (m)
- 10
- Employments
- drainage, drying up, slightly dirty waters
- Liquid temperature max. (° C)
- 40
- Height (cm)
- 43.1
- Width (cm)
- 24.3
- Weight kg)
- 14.2
- Guarantee
- Two years
Models and performances VXm 35-50
|
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Construction data of the VX50 series
Bearings
| Pump side motor bearing | 6203 ZZ |
| Opposite side engine bearing | 6203 ZZ |
Tree holding
| Type of seal | Double mechanical seal in oil chamber |
| LM diameter | 14 |
| LM fixed ring | Silicon carbide |
| LM rotating ring | Graphite |
| LM elastomer | NBR |
| Shrinkage DN1=450 DN2=350 | MG1-14D SIC |
| LP diameter | 14 |
| LP fixed ring | Silicon carbide |
| LP rotating ring | Silicon carbide |
| LP elastomer | NBR |
Materials
| 1.0 - Pump body | Cast iron GJL 200 EN 1561 |
| 1.4 - Basic | Stainless steel EN 1.4301 (AISI 304) |
| 3.0 - Impeller | Stainless steel EN 1.4301 (AISI 304) |
| 4.0 - Pump shaft | Stainless steel EN 1.4057 (AISI 431) |
| 6.0 - Motor holder | Stainless steel EN 1.4301 (AISI 304) |
| 6.1 - Engine cover | Stainless steel EN 1.4301 (AISI 304) |
| 7.0 - Lantern | Stainless steel EN 1.4301 (AISI 304) |
